minijeff Posted August 13, 2009 Posted August 13, 2009 I must be overlooking something simple. I just bought a SuperNova Tactical model with pistolgrip stock. I wanted to take it apart for a good cleaning, but couldn't get the trigger assembly out. The manual says to loosen the stock, but I can't figure out how to get the recoil pad off. Quote
Trapshooter1 Posted August 13, 2009 Posted August 13, 2009 If it is a pop in recoil pad, flip the gun recoil pad up. push the bottom of the recoil pad towards the top with a lot of pressure, then pull up. You will need a 13mm deep socket to remove or loosen the stock. Quote
minijeff Posted August 14, 2009 Author Posted August 14, 2009 That did it. I just didn't dare push that hard. Thanks for your help. Quote
Trapshooter1 Posted August 14, 2009 Posted August 14, 2009 That did it. I just didn't dare push that hard. Thanks for your help. No problem, and good luck with your Benelli. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.