f468357 Posted November 16, 2004 Posted November 16, 2004 I went to the pattern board and found that I want to change my M2 to see less rib. I read my owners manual and if my memory is correct I have X,A,B, and C shims. B was installed and if I understand this correctly C should change my sight picture to see less rib. I have read of a D shim. Is that for the M2 and SBE2? Also I have read that the SBE2 C shim is the old SBE D shim. Is that correct? What available shim will allow me to see the least amount of rib? It also pointed slightly to the left but I am right handed and my understanding is that there is only one shim for cast and I have the correct one installed. Any help is appreciated. Quote
Drundel Posted November 21, 2004 Posted November 21, 2004 yes, SBE D=SBE2 C where are you shooting? above or below? Quote
f468357 Posted December 2, 2004 Author Posted December 2, 2004 Sorry for my slow response. I am shooting high and seeing too much rib. Is there a SBEII D shim. Bennelli customer service said I should have gotten a D shim with my M2. I had a B installed and went to C. Didn't notice a huge difference. Quote
Drundel Posted December 3, 2004 Posted December 3, 2004 No SBEII D shim, the SBEII C shim is the same as the D shim as the SBE. If you are shooting high wit the C you can try the X shim, but good chance are it won't help much. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.