roster

Drundel I gave a good breakdown cleaning, oiled it according to the Miltec recomendations. Shoot 6 rounds of skeet, no ejection problems. Thanks for the tip.

Drundel, what you last described is what it does 70% of the time, the other 30% the hull ends up almost 180 degrees to the action. Thanks for the insight, I will have to give it a good cleaning and then try the oil you recomended.

Thanks Drundel, I thought stovepiping was about mis-cycling unfired shells from the mag to the chamber. My problem is with the fired hull, educate me.

Thanks rdn, but it jambs with 2 3/4-1 1/4 oz at 1450fps. Before it started acting up it would eject/cycle anything I put in it. It acts up sporadacilly, every time I think it has worked its self out, it jambs again.

My SBE has started jamming, it ejects the hull but it somehow ends up with the empty hull (2 3/4") flipped around with the primer end farward at the entrance to the chamber and the open end holding the bold open. Anyone else had this happen if so, how did you cure it?