Hello all I have a question/problem regarding with my new 11707 I picked this up yesterday for my Christmas/B-day present for my self. The problem I am running into is upon assembly my bolt has become frozen in the open position. I installed the bolt in to the barrel as per the instructions and then joined the upper half and the lower half together. I had to back the barrel out about a quarter of an inch to get the hand guards seated correctly. In doing so and upon further inspection it seems that the face of the bolt has rotated thus not allowing the barrel to be seated correctly. I removed the barrel and then tried to remove the bolt carrier group no go it 100% frozen will not budge it stuck in the open position. I have taken out the trigger group thinking it was hung up on some thing still a no go. I guess my question is did I do something wrong? I followed the assembly instructions as per the manually I am assuming that I did do something wrong as this shouldn’t happen out of the box right? My next question is where to g o back to the gun shop or directly to Benelli?
