[270 Wsm Or 300 Wsm]

Jim

In January here is a late rifle season, in the southern part of Iowa, but I do my rifle hunting in the blue grass state.

Up in the hills of the southern part of Kentucky.

Holmux

[270 Wsm Or 300 Wsm]

I have a R1 .300 WSM, I put 200 rounds true it, shut a few deer’s and are very satisfied whit it’s performance, it have never jammed on me and it will shoot 1.5” groups.

I don’t have any other auto’s to compare it with, so maybe there is a better Auto out there !!

 

I find the .300 WSM a very all-round caliber, I normally use 180 grain bullet, which somebody might find a little on the heavy side, but it’s rock solid in all weather conditions.

The Deer’s I have shut, have all been neck shuts and the deer’s dropped dead on the spot, probably possible with a lighter round as well, but I like the extra bang.

[300WSM Ammo/loads]

Hi All

 

Well gfyoung3, I will not get into the 3 questions, 1 answer confusion, but here is the little experience I have made so far whit the ammo.

 

I have a R1 300 WSM as well, I have only been shooting 180 grain ammo, Winchester Power Point and XP3.

 

I am happy with both, I shot the XP3 on a windy day with very good results, maybe the 180 grain will work for You as well.

 

As a final comment, I don’t have a god, with all the religion and superstition there is in sending a bullet out true a steel pipe, by igniting gun powder, I don’t need one.

[300WSM Ammo/loads]

Hi All

 

Well I agree with tucker, this is not a target rifle, but a hunting rifle. On the other hand I would like to hit every think I point the gun at, that’s the only reason I would carry it out to the woods, so accuracy is a factor.

 

I got my R1 (300 WSM, not a comfortech ) 2 weeks ago, and I put 100 rounds true it, I have only shot the same ammo until now, Winchester Power Point 180 grain (X300WSM)

After the first 60 shots I found my shooting was more consistent, if this was the barrel that needed to get “Broke in” or me getting use to the rifle, I will never know, but I am happy with what I see on the target.

 

I tried to shot the rifle, as I would out in the field, long brakes, short brakes, 4 shot very fast, 3 very slow, at one time my barrel was so hot, my sight true the scope was blurry.

 

I shot most of my shots leaning against a pole or laying down, as I would hunting in the field, I find these results more accurate and something I can use when I get into the hunting fields.

It doesn’t help me shooting perfect groups from a bench rest, if I cannot reproduce these shots in the fields, where it counts.

 

The only changes I made to my R1, was adjusting both steps in the trigger, and adding a larger recoil pad.

 

I will be hunting Deer with it next weekend, looking forward to the first field test, then it’s only up to me to point the rifle in the right direction.

[Is there a limit to trigger adjustability]

I just finish sighting my R1, I scoped it with a Buck Master 3-9x40 BDC, I put 100 Winchester Super X .300 WSM 180 grain power point (X300WSM) true the gun over the last week, and my groups are getting closer and lands at the center I aim fore (100 yards)

 

This load is for heavy game CXP3, to heavy for Deer hunting next month, but probably a god load for ‘Shooting in the barrel’.

I will try some lighter loads next week, I ordered some Winchester Supreme XP3 .300 WSM 150 Grain and some 180 grain.

 

After shooting with my gloves on at the range, I adjusted my trigger pull a little up again to get a better control.

 

Overall I am satisfied with my R1, I just need to fix the front stock so I docent rattle lose all the time, I believe this will work with a O-ring or similar.

[Is there a limit to trigger adjustability]

I just got my R1 this week, I put 40 rounds true it and was not impressed by the trigger.

 

I adjusted it my self (adjusted the springs, no polishing or grinding), I now have a trigger pull around 3.2 and a very smooth trigger.

 

The lower limit for the trigger pull, is the energy the trigger needs, when You release the trigger after a shot, here the trigger has to move from the lock that catches the hammer after a shot (where the trigger is still pulled back), and move it over to the lock that releases the hammer when You pull the trigger again.