m4ever

Ok did a little bit more tinkering and this is what my conclusions are: the mag follower is in the right direction. Also when I look down the mag tube w/ ext (barrel off of course) I do see a small lip where the two join. When I drop the follower down with just gravity acting on it it does stop at that lip also when I drop a shell down sometimes that will hang up too. So when I put in the factory spring w/ mag ext it will hang up and thus not feed until the follower passes the lip which requires me to tap the mag for it to do. then it will feed until the last shell which just kinda of half way feeds and gets jammed. that has to be from the spring not being srong enough.

yeah, it wont feed one single shell. When I dig the first out then it wont feed the next either. I know its a mag spring issue with the factory spring so I just figured it was hanging up in there. I guess Ill try triming the surecycle spring until I can get all seven in. I hope to get the the full mag tube soon then I see if the factory spring works.

I'm just looking for some sugestions or to see if this is a common problem. I have added the sure cycle mag extender and the mag spring which came with it and cannot fit 7 2.75" shells down the tube, just 6. I think this is due to the longer spring of the new spring because when I put the factory shorter spring in all 7 fit. However, with the factory spring and the mag extention not one shell will feed from first to the seventh. I think this is due to the spring hanging up between the mag tube and extention. has anyone had this problem and what can I do to fit 7 and have them all feed?

So Now Im in the market for a collapsible stock for my benelli m4 and called impact guns to see if they had some. I talked to the manager there and he said that he recieved a memo saying that the ATF told benelli to stop sending them out. I'm wondering if anybody has heard anything more about this and where some possible places might be where I could get one of the few remaining stocks