[Where do you find instructions on how to install the shims?]

Thanks again Tucker

[Where do you find instructions on how to install the shims?]

I got the oil, wrench and tubes but no maual or parts list.

All my other guns my cheek hits the stock when I pull them up. This gun I have to hold my head up a little. I think I need to order the low raise cheek pad to replace the flat pad that is on the gun. when the Mossberg 3 1/2" first came out, I bought one and it came with 3 differant cheeck pads. I was wondering if this was something else I might have not received with my gun. Hopefully after I get my manual the info on how to change the cheek pad will be in there.

I downloaded the manual but it jumps up and down when I try scrolling to read it.

[How do you email customer service?]

The length seems good. I guess I'll have to stack it up next to one of my guns that fits me better and go from there.

Thanks again

[Where do you find instructions on how to install the shims?]

This adjustment is not that hard to do and if ya can't do it find someone that can, so simple. Just install a front site ya can see, the benelli OEM front sight is usless IMO anyway! Then you will be ready to cheeek it up and you will not have to pick that lazy eye up anymore. Stock adjustment in manual call C/S and if ya did not get chokes this would be a good time to address this issue also!! Take it to a range with a friend and some tools and deal with it!! This adjustment takes about 15 minutes tops and if everyone else does it why can't you?

 

Because my fingers are arthritic?

I don't really look at the sight while I'm shooting.

A differant sight won't do much for proper gun fit.

If you pull a gun up and your head is bobbling around you'll never shoot consistantly. It should be one easy, mindless consistant motion. I need to get the stock up to my cheeck, not my cheeck to the stock. I need to make it fit like my 870's

 

I got chokes. Since I'm missing the manual I'm curious about what else may be missing from the case.

What all was supposed to be in there?

[How do you email customer service?]

Can't help you there.

 

Check your e-mail on the hotmail account listed in your profile.

You have a message from Benelli customer service.

They need your mailing address

 

Thank you Tucker.

I will ask around and try to find somebody within driving distance that knows how to adjust the stock on a Benelli SBE II

[How do you email customer service?]

No. The printed manual is in multiple languages just like the online versions.

 

Actually I was wondering if it was possible to just download the English part. With my small screen and the jiggling it's hard to keep up. The jiggling might have something to do with my mouse but the only other time I have a problem like that is when I'm on my cell phone.

 

Yes, the manuals come with the gun.

 

Jiggles up and down?

Sounds like a computer problem, unless you're sharing a room with Hogwild .

 

I'll point someone at Benelli to this thread and see if they can contact you via e-mail.

 

No promises.

 

I really appreciate all the help and advice.

Can you point me in the direction of somebody to better fit this gun to me? Years ago I used a guy that made custom wood stocks. He could make a gun fit you in a matter of hours.

[How do you email customer service?]

I did download the manual but I have trouble reading it on my computer. It jiggles up down a lot.

Any advice on getting a manual? Are the manuals supposed to come with the gun? I tried to call the dealer but they were closed. I start work at 6 and don't get in the house til 5 or later.

Can you download just the english part of the manual?

Thanks

[SBE2 Recoil Reducer]

tucker301,

I received the recoil reducers to go in the SBE ll synthetic stock on Fri. I installed them today and I think they're going to work fine. In the stock there are 2 (1-5oz. & 1-8oz.) to total 13oz. I also put a forend cap reducer on at 8oz., to give it some balance. With a Recoil Pad Replacement Kit I changed to a Limbsaver Pad. I had other things done to reduce the recoil also, let me know if you want the whole story.---GB

 

I would like the whole unadulterated story please.

Thanks

[Where do you find instructions on how to install the shims?]

I need some adjustment on the stock on my SBE II. I can't cheeck the gun up as I'm used to. If I don't pay attention my eye gets to low and I can't see the bead.

Thanks

[How do you email customer service?]

How do you email customer service? I'm not available to call during buisness hours. I did not receive a manual or warranty registration card with my SBE II.

It says in the note to email customer service but I can't find a link to their email on site.

Thanks

THE FORUMS ARE NOT A CONDUIT TO CUSTOMER SERVICE. ALL CUSTOMER SERVICE QUESTIONS AND CONCERNS SHOULD BE DIRECTED TO CUSTOMER SERVICE VIA PHONE OR EMAIL (301-283-6981). DO NOT POST CUSTOMER SERVICE QUESTIONS IN THE FORUMS.