MikeyZ
-
Posts
69 -
Joined
-
Last visited
Posts posted by MikeyZ
-
-
Thanks. Yeah, this has always been one of my favorite topics
-
Hi Hoser,
Yeah, the top part that I use to mount the light and switch is a Sidearmor. I only have the Surefire forearm on there for 922r compliance. I like the stock Benelli grips better also and plan to switch back soon after I get a Mesa Urbino stock since it will serve as a US made compliance part.
Later,
Hookster
Wouldn't a KZ charging handle take care of that as well? It's made in USA as far as I understand it.
-
Hey all, I've been out of the loop a while. In regard to the Surefire rails, are they still fitting funky, or has that issue gone away?
The Surefire IMO is the simplest way to get a little rail space on the M4 without a lot of added weight.
-
Thanks fellas. I'll likely try one or more of these techniques until the thing is clean. Good suggestions.
-
OK, pride-swallowing time.
I have an M4 with (what I am assuming to be) lead built up inside the bore. I have tried everything to get that crap out.
Yes, I have actual lead remover, and I have used mops, nylon brushes, bronze brushes, and patches to get that stuff out of there (I followed the instructions to a t). Crap is still in there, and thick.
All I have been shooting is #7 bird, 00 buck and some rifled slugs.
PLEASE, give this apparent amateur some guidance on getting that crap out. Thanks!
-
All,
I got the stuff last night and broke one open. Just a typical cardboard buffer and the shot is LEAD. I was able to cut one in half with my pliers.
So, the lesson to me is, believe half of what you see and none of what you hear (on the internet). Steel shot my a**.
Thanks guys.
-
It is not steel as far as I know. VERY poor patterns from this load as well. Good for nothing but looking at imho. Open up a shell and confirm for us, but I bet you find: just a cardboard disk, no buffer, and some soft lead OO pellets.
Yep. As soon as I receive the stuff the first thing I'll do is break one open. I'll also try to report back on patterning. I have zero experience with this stuff, and can't find a report anywhere on the web.
-
Here's the link the ammo:
http://www.midwayusa.com/Eproductpage.Exe/showproduct?saleitemid=857119
The description does not say steel, but word around the campfire is that it is, indeed, steel. Therefore, I am operating under that assumption to be safe.
Thanks for your interest in this.
-
All,
Situation: M4 11707 with factory modified choke. Steel OO Buckshot (that Winchester MG stuff).
Is there any risk of damage if this stuff is fired through the M4 with the above configuration? I can't see why, but I only have experience with steel bird shot, so I want to make sure pushing those big OO buck babies through won't cause any harm.
Not worried about patterning in this question. Just potential for damage.
Thanks!
-
This forum's been a wealth of info to me. The debates are more entertaining than Leno. There are members of this group that know more about shotguns than I will ever know, and usually you get no BS answers to important questions, something that you take a shot in the dark at when dealing with most CS departments.
Score one for the forum
-
can you post a link as to where you got your vickers from?
LouDiamiond originally posted this source, and after a bit of research, I bought it here:
http://www.greygrouptraining.biz/Blue_Force_Gear_Vickers_Combat_Applications_Sling_p/vcas.htm
Had no problems with the transaction. There are other sites to get it from for about the same price. I chose the black one, which turns out to be a sort of muted black (if that makes sense), so it blends nicely with the rest of the M4.
-
I will add a positive note for the Vickers. I was all set to buy a Specter Gear (I have had them in the past and liked them), and on a whim went with the Vickers to try. I like the Vickers particularly on the Benelli *because* it's a 2-point sling, very simple, yet you can manipulate it in just about any way (quickly) to accommodate just about any position you want. Thumbs up for Vickers. Excellent quality too.
-
One issue of consideration when speaking about pellet size is how much penetration you are looking for. Some people prefer smaller pellets in defensive loads so in a residential scenario you don't rip through walls endangering everyone in the house.
In other situations you probably want the all-out knockdown of 000 buck. If that's the case, try using some of Caligvla's tri-ball ammo that snapped his B&T rail in half
-
1
-
-
If you haven't yet, I might suggest checking the muzzle end of your weapon where the ring for the mag tube attaches to the barrel for any stress cracks.
Either that BT rail is one crappy unit (or had a manufacturing flaw) or you had one seriously hot load that flexed the heck out of that baby.
-
It might have related to all of us if the vote was 5-4 the other way.
-
Wow. Does the ARGO system work well with a barrel that short?
-
That's awesome. Just need a bi-pod on the front of that baby and a spotter
Funny - this thing doesn't like it if I spell bi-pod as a single word......
-
Ahhh yes. I remember this. thanks
-
Adam,
Possibly I'm ignorant. I cannot find "M4 Operator's Manual - United States Marine Corps" online anywhere. Point me in the direction? I would like to hear what the Marines have to say about caring for the M4.
-
Hey CQB,
Have you noticed that the B&T allows gas to blow out all over your fore hand when shooting? That's one of two complaints I have heard about that unit --- the other being that it's heavy.
-
And you already locked it away in your closet??
-
We will be holding a SoCal HID shootout on May 24th with some of the most powerful production handheld lights commercially available. You guys are welcome to join the fun
.Any more detail on this event would be appreciated.
-
Hey Adam, you seem to be really into lights..."I just want an FCAM"...
What do you use that monster PH50 for? I could see it being really cool to use in the desert or offshore....or do you just wake up the neighbors occasionally?
How do you like the Surefire Beast or HellFire?
Man, that picture is sick.
-
The Burris looks pretty good. Have to look into that further, as I know nothing about them.
Deldorado - How is that Docter in low vs. high light environments (since there is no adjusting the brightness of the dot)? Is the front post viewable through the optic? Lastly, how long is the tritium in that baby supposed to last? Thanks for your input.
Benelli USA CS: awesome
in Benelli
Posted
Just wanted to give credit where it is due. A few weeks ago I attempted to remove the recoil spring (finally) from my M4, only to find it would not come out. The threaded plug was stuck in there somehow. Trying to be gentle got me nowhere. I didn't want to take a chance on stripping the threads out of the recoil tube, so I called Benelli. They said to send it to them and they will check it out.
A couple weeks later (thanks to Hurricane Sandy), I got a call from one of the gunsmiths. He asked a couple questions, and then had it fixed that afternoon and sent the frame back. I now have my M4 receiver back and it is better than new (literally).
Love Benelli! Way to go guys.