m4_fan
-
Posts
17 -
Joined
-
Last visited
Posts posted by m4_fan
-
-
I don't use the M4 for home defense.
The rule here is that any firearms used in an incident is confiscated by the PD.
About a 50/50 chance of ever getting it back.
Attorney fees quickly exceed the cost of an M4.
So I use a "throw-away" FN TPS 12 gauge w/ Winchester Ranger 00 buck for home defense.
-
About how long before the dealers/distributors might have these?
I could not find these M4 stock on Brownells, Midway sites?
-
I had to fit mine a little, it was a tiny bit too long.
The barrel would not fit up to the receiver all the way, gap evident.
Milled about .060 off the back of the B&T, fits perfectly now.
Yes, I had to stare @ the shims and spacer a while before it made sense how they
designed it.
-
-
Standard fixed stock.
I want to customize my M4 w/ a non-USA made forend (Brugger & Thomet).
-
Yes, I'm looking for a way to meet the 922r, plan "B" is to make my own gas pistons
and hammer.
The pistons (269J) won't be too difficult, but the hammer (002J) metallurgy and heat
treat will be more effort.
1. Receiver
2. Barrel
3. Bolt
4. Bolt carrier
5. Gas piston 1*********************1
6. Gas piston 2***********************2
7. Trigger housing
8. Trigger
9. Hammer*******************************3
10. Disconnector
11. Buttstock
12. Pistol grip **possible???
13. Handguard
14. Magazine body/Tube************************4
15. Follower******************************5
-
Does anyone make a replacement USA made P/N 083J rubber pistol grip?
-
Hi,
I put a DMW in my M4, normal right hand configuration.
The machine work for centering on the plunger C/L is not symmetric, so
I don't think it is reversible.
However, next time I have the M4 apart, I'll see if the DMW safety can be inserted
and work properly from the Left.
-
yep, just wider stubs, a compromise, but better than the stock unit, I hope
-
Hi,
Just received this today from Davesmetalworks, fits perfectly and lets
me keep the irons. Nice wide rails, as opposed to "stubs" w/ the standard rail.
http://i180.photobucket.com/albums/x257/fish1_07/DMW_rail.jpg
-
Hi,
This address has worked well for me in the past for technical issues:
Chief, Firearms Technology Branch
Bureau of Alcohol, Tobacco, and Firearms
Firearms Technology Branch
244 Needy Road
Martinsburg, WV 25401
-
It takes my local Post Office about 3 days just to get packages from where they are unloaded in
the back, up to putting a notice in my PO box.
So my tube is probably in there somewhere.............
It showed up @ the PO today!!! looks great. Kip, thanks for overcoming all the challenges!
-
Hi,
Has anyone ever ordered a Brugger & Thomet Benelli M4 Quad Rail Handguard - (p/n=BT21353) from DSA?
How long did it take for delivery?
I have one on back-order, DSA has no idea when they will get more in.
Thanks,
m4_fan
-
I tried the SLIP 2000 to get the carbon out of the booster of my 1919A4, soaked it for days,
no luck.
But that is not a fair use of the product, nothing except a air-powered needle scaler will get
the stuff out of a booster, I subsequently found out.
The next time I went to use the SLIP 2000, it had eaten through the metal can and oozed out
onto the shelf. Potent chemicals!
-
Thanks for the info, Dave's recent reply confirms all.
Dave says he will have a new rail in a couple of weeks that conforms to the stock
M4 hole pattern, but it is still full length, just cut off a bit if keeping the rear sight.
He will take mine back for $$ credit on the swap old/new
-
Hi,
I have read lots of threads about the crappy stock M4 rail, and the possibilities of future improved designs coming to market someday.
Being a FNG, I bought some parts from DMW in the mean while:
Ben001 - Speedbar For Benelli Autoloader
Ben002 - Oversized Safety For Benelli Autoloader
Ben003 - Tactical Bolt Handle For Benelli Autoloader
Ben005 - Picattiny Rail
The rail is very well made, but unless he sent me the wrong one, none of the holes line up where the stock M4 holes are drilled & tapped, and the DMW rail is too long to fit w/o removing the rear metallic sight.
( I sent Dave an e-mail just to check "is this the right rail?")
Anyway, I have a Bridgeport mill and can machine Dave's rail to that the hole pattern is identical to the stock Benelli M4, plus shorten the thing so I can keep the rear sight.
Am I on the right trail here, or should I just wait for a finished product from one of the guys?
M4_fan
What three guns would you take into battle/survival situations
in Benelli
Posted
I'll go with what served me well in the Army in the 1960's for part of it:
M14 (or civilian M1A)
M4 (of course)
.45ACP 1911