Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Benelli Forums


  • Content Count

  • Joined

  • Last visited

Community Reputation

10 Good

About Petek54321

  • Rank
    Junior Member
  • Birthday 11/08/1985
  1. I sent the whole gun in. I'm guessing that's what you have to do. Otherwise they couldn't test the repair
  2. I sent mine to benelli and they fixed whatever the problem was. It was covered under warranty so, of course, they don't tell you what they fixed. Haven't had any problems since. I suspected something was off with the firing pin or the firing pin spring but I can't be sure.
  3. yep, the gun has been cleaned after every time i have shot it. The firing pin and spring look fine and the inside of the bolt does not appear to have any obstructions.
  4. I have had it happen on 3 different brands of ammo
  5. I have had my supernova for about 2 months and have fired about 150 rounds out of it. Out of the first 100 rounds i had two rounds that failed to fire and there was a light firing pin mark on the shell. Today I went out and shot 50 and probably had about 10 of these. I have read a thread from about a year ago and it seems like this is a pretty common problem with novas and supernovas and the following reasons as to why have been given. 1. Too much lube 2. Too little lube 3. Firing pin spring is too tight 4. Firing pin spring is too loose 5. There is a little play in the forend after the action is closed and locked. There was no conclusion given as to what to do to fix this problem. #3 seems like the most likely problem to me but I am by no means an expert. Please weigh-in with your thoughts.
  • Create New...