bamacrowkiller

Remove barrel from gun, place a center punch in a vice. Probaly need help for this , place dimple side of rivet over center punch, use a pin punch on other side hit with hammer

Signed up to see if I could find help for a problem. I found it. My problem was that shells would not cycle consistantly. When unloading gun shell in chamber would come two thirds of the way out bolt would stop. Lift extractor hook bolt would go back shell would fall loose in gun, bolt would go back. Trouble was the rivet closest to chamber on ejector was loose catching the rim of shell. tightened rivet problem gone. good luck!