Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Benelli Forums


  • Content Count

  • Joined

  • Last visited

Community Reputation

0 Neutral

About Adam_Fur

  • Rank
    Junior Member

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Thanks guys. I had to take the magazine off as Steve Rose explained above. Cleaned it out and found what Fodderwing mentioned, lots of grit and wear which needed to be cleaned out and is now back to working order. Been a pain but looking forward to getting it back on the field. Thanks again.
  2. Hello, I am a shooter in the UK with an M2 Field 1+2. I estimate around 1000 rounds have gone through it. However, after the last 300 rounds or so malfunctions have begun such as second round not chambering and stuck on the lifter. I put this down to me using light loads such as 24/26 grams. During my last shoot the problem increased and then the magazine tube follower is jammed in the tube. I can push it (requiring great force) back in to the tube but it gets snagged again when it falls back toward the chamber end of the tube. It no longer comes flush with the end of the tube in to the receiver and is stuck around an inch into the tube. I’m thinking the cycling issues may have all been down to a stiff or jammed follower not allowing shells to pass easily to the lifter. Ive tried to clean it by taking the cap and spring out the mag tube but the follower will not come out. Has anyone had or heard of this issue? Does anyone know if I can take the tube off? Iwant to clean it and maybe replace the follower to hopefully resolve this problem. I’ve spent ages researching online but can’t find anything on the M2 Field. Thanks in advance.
  • Create New...