-
Posts
24 -
Joined
-
Last visited
Posts posted by Facundo
-
-
I'm interested! usually, Ti runs pretty smoothly on everything and its lightweight also.
-
Nice handguard. Do you know if there's already available for purchase somewhere? thx
-
I love my Supernova Tactical. Smooth operation, rugger as F!, reliable and dependable. The only thing as a con, is the weight but its built to last forever SERIOUSLY!
-
On 9/15/2020 at 2:01 PM, MrFootball said:
Is the other hole on the bottom end of the Supernova collapsible stock configured to be setup for QD?
-
Hi folks,
I've found these 2 models (below) that I believe might be the best charging handles for an M4 but still not sure about the bolt release. Any suggestions?
-
4 hours ago, Kelevra0313 said:
Hey all,
Just got this telescoping stock for my Supernova... was wondering myself the best way to tighten that up... thanks for the answer.
As a follow up question... do you guys loctite those threads for the grip?
Don’t need it. It actually locks in place super good.
-
-
49 minutes ago, MrFootball said:
Is the other hole on the bottom end of the Supernova collapsible stock configured to be setup for QD?
I think so, but placing the QD there would flip your stock sideways in VERY uncomfortable position tho. I followed what most assault rifles uses for positioning the QD
- 1
-
1 hour ago, Vertigofirearms said:
oh well it is indeed 5mm.
Yeah, sorry. I meant 5mm
-
-
21 minutes ago, Birdog19 said:
Nice pictorial - tutorial!
Thank you! It’s easy, just gotta follow the Noveske QD flush directions and that’s it. The only thing that I’ve changed is instead of the Blue treadlocker I used the RED since is permanent.
-
-
-
-
4 minutes ago, StrangerDanger said:
There should be philips screws inside those holes. Apply some lube to the screw driver and it will press in to the hole. Push firmly as you unscrew the screw.
Thank you! I’ll give it a try
-
On 3/4/2020 at 9:56 PM, Jeff in CO said:
PROBLEM SOLVED!!! ?
Schutzhund,
Thanks for the reply! You would know better than I would. I was quickly perusing the M3 manual and probably missed it. As far as I know, it is the same stock system, but I cannot remove mine like they show with the M3 (from the top as that extra "U"-shaped cutout is not on my grip). I think part of my problem is the factory had the retaining nut torqued down so much, it was going to be impossible to move it with something like the bolt.
I went ahead and purchased the "Vmotor Chrome Vanadium Adjustable C Spanner Hook Wrench Tool - 3/4-2"(19-51mm)" from Amazon (link in previous post). The holes are 4mm in diameter, so the other wrenches on that page would be too big (correct size highlighted in screenshot with pricing). It's only $11. I'm guessing they use something similar to this in the factory. It loosened the nut with virtually no effort. The surface is wide enough, it doesn't mar the polymer top of the grip (although I'm sure over time I will start to see a little shine from it, but that is no big deal). It also allowed me to easily torque the grip back on so it won't loosen while shooting. I'll just keep this in my gun case with the gun.
Hopefully this helps if anyone else runs into this. I still think Benelli needs to do a better job with providing information about this, especially on the pump SuperNova that doesn't have any sort of charging handle.
Jeff
HI JEFF, MAYBE YOU COULD HELP ME WITH A QUESTION ABOUT THE SUPERNOVA TELESCOPIC STOCK: HOW CAN I REMOVE THE RUBBER PAD/BUTTSTOCK? I noticed there's 2 little holes in it, but seems like there's no screws in it. Hope you can help me with this! Thank you!
-
PLEASE HELP!!! ?
-
-
On 5/21/2020 at 9:20 PM, Funjeff said:
https://www.midwayusa.com/product/100531033?pid=667570&cm_vc=OBv1
https://www.opticsplanet.com/nordic-components-shotgun-barrel-clamp-with-tac-rail-12ga.html
Barrel clamp with small pic rail. Nordic
THANK YOU!
-
3 minutes ago, rhodesengr said:
There are two solutions I have found. The Super Nova tactical receiver is drilled and tapped with holes to mount a rail on top of the receiver. The gun comes with the holes plugged. Mesa tactical makes a rail/shell holder combo that can mount to those holes. If you go this way, the light would be on top.
If you don't like that, you have to add a magtube extender. I bought one from Carlsons but Nordic makes them too. Then you can mount a rail on the extended mag tube. You don't actually have to use the mag tube to increase capacity. You can simply use it as an extended barrel nut. This is what I am doing.
You certainly can change to a longer spring and have increased capacity but if you do that, the spring comes out every time you remove the barrel.
top rail https://www.mountsplus.com/mesa-tactical-benelli-supernova-side-saddle-sureshell-6l.html
Carlson extender https://www.cheaperthandirt.com/carlsons-benelli-novasuper-nova-12-gauge-7-shot-magazine-extension-steel-black-04502/FC-723189045029.html
tr-rail, 1: size fits carlson tube https://www.mountsplus.com/l&m-shotgun-magazine-tube-rail-mount.html
THANK YOU!
-
Any ideas on how the heck I can install a mount or small picatiny rail close the muzzle to install a flashlight? Ideas, pictures?
most appreciated!
-
-
Hello Gents,
I need to remove the rubber buttstock from my Supernova Tactical Pistol Grip stock to install a Noveske QD mount and can’t find anywhere if I just have to pull it off or do something else. Looks pretty well settled in place and have 2 little holes but doesn’t look like there’s an screw there.
Please help!!!!!
https://images.app.goo.gl/3cNVADZnTAN2cJjc6
FFT Oversized Bolt Release Button - New Product
in Benelli
Posted · Edited by Facundo
From the research I've made, I think both the GG&G and the FTT are the best out there in design and performance. I don't think drilling something so small and delicate like the tiny little issued bold release should be done by anyone. I'll go with the GG&G.
GG&G
FTT