Hello Everyone,
So a few months ago i installed a TTI accuguide extended carrier, TTI Reduced power trigger spring and TTI reduced power hammer spring. Everything else on my M4 is stock except a limb saver pad. My M4 is a 7+1 with fixed pistol grip stock if that makes any difference.
Took it to the range today to mess around with some #7.5 target loads. Load the chamber hit the release button, Load a few shells in the tube, aim down sight, safety off go to pull the trigger and click nothing happens. Okay weird rack it eject the shell, next shell loads into the chamber, aim down sight pull the trigger click nothing happens again. Repeat the next round fires fine, cycles fine, Next round fires fine, Round after that back to the click and no fire. I am guessing it is something with the reduced power hammer spring. Has anyone else had this issue or did i mess something up installing these mods? Should i just go back to the stock hammer spring? I have attached photos of the trigger assembly with the hammer back and forward.
Any feedback is appreciated and thank you in advance.
IMG_9114.HEIC
IMG_9115.HEIC
IMG_9116.HEIC
IMG_9117.HEIC