cold_snap
-
Posts
41 -
Joined
-
Last visited
-
Days Won
1
Posts posted by cold_snap
-
-
On 11/10/2021 at 10:14 PM, StrangerDanger said:
https://www.benelliparts.net/store/p30/PRE_ORDER_Benelli_M4_922r_Trigger_undiscouraged_Kit.html
I've installed about ten sets of them over the years. No issues. Some required minor fitting on the hammer to disconnector sear. The trigger pull was similar to OEM.
Had him put a set of these on my M4 with some various other parts. No complaints and runs just as good as the original for me.
-
1
-
-
-
Anyone know if the FFT A&S trigger guard will fit the Benelli M4-1014?
-
On 8/16/2021 at 9:58 AM, StrangerDanger said:
Knew you’d be a FDC guy too!
I’d add to get a Briley choke wrench and their choke grease. The factory choke tool might as well be thrown in the trash. It’s only value is the thread cleaning portion. Grease your steel chokes or they will rust.
Where might one find the aluminum trigger guard?
-
On 7/21/2021 at 10:25 PM, ZarZ said:
Yep just the barrel, and the E-Form 1 is SUPER easy, I got the barrel off GunBroker, seemed to be the best price.
.thumb.jpg.e123719012c51c2c13b375aa94fb5056.jpg)
How long does the E-form take to come back?
-
On 8/8/2019 at 11:04 PM, StrangerDanger said:
The front sight and rear sight from Meprolights will remain black since you can't plate the sights with their tritium lamps installed. There is a work around for this, but it is costly. You'd have to NP3 plate the OEM sights, then send those out to Tooltech to have Trijicon lamps installed. I think they charge a ridiculous amount, like 250 dollars. The hood of the front sight and the rear sight housing are going to be plated on this one.
It will end up looking like this one I did a while back, but the Trijicon RMR's that are nickel boron plated aren't readily available anymore.
Love the silver benelli's. They have one at my local bass pro. Thought about grabbing her!
-
Just got my Sig Cross back from recall work.
-
On 7/21/2021 at 10:25 PM, ZarZ said:
Yep just the barrel, and the E-Form 1 is SUPER easy, I got the barrel off GunBroker, seemed to be the best price.
Looks awesome!
-
On 7/22/2021 at 6:29 PM, ArthurMorgan said:
Doesn't look great, but it works. Plastic shield I had lying around, for a Mossberg. Cut off the lips on the breech end, used a ranger band. 2800$ gun - $25 heat shield. ?
I was going to get the briley 3 gun forends but I like the fit and feel of oem.
I wish they made something similar in demension to the oem with maybe a few mlok areas.
-
On 7/17/2021 at 7:37 AM, RJHUB said:
5000 rounds.
Ammo shortage has now made its way to 12ga in my area. Hopefully it comes back in stock soon.
-
On 7/17/2021 at 8:23 AM, StupidManThing said:
How long have you had the gun? Mine was really stiff when I first got it but it's smoothing out after only a few hundred shells.
Probably 100 shells into breaking it in.
-
Amy recommendations for avenues to get a reduced trigger pull from the M4?
-
Just now, cold_snap said:
No mechanical issues. It was just the standard american flag M1014 model. I had the 3 position buffer tube added, trigger pack assembly and follower added to make it 922r compliant and also the 7 round magazine tube.
The length of pull on that one position C-stock sucks for small folks. Couldn't shot the thing comfortably.
-
1
-
-
4 minutes ago, ArthurMorgan said:
What were the issues with it, if you don't mind me asking?
No mechanical issues. It was just the standard american flag M1014 model. I had the 3 position buffer tube added, trigger pack assembly and follower added to make it 922r compliant and also the 7 round magazine tube.
-
1
-
-
Just now, alpha 33 said:
I really like this weapon in it's base form. The simplicity , ease of function, simple maintenance and dependability. I think John Browning would be happy with this one. KISS = Keep it simple stupid.
My 2cents..............................
I agree! I debated going all out with it and adding a bunch of extras. I'm with you I like it mostly basic. I probably will eventually grab a 14" barrel and sbs her when I get some more money. Easy to swap barrels for some fun and added sexiness.
-
On 7/3/2021 at 1:19 PM, Djack69 said:
And a silver-mariner color
Love the silver one!
-
-
Big shout out to StrangerDanger for finally bringing my M4 to life after almost a year in the safe and making it functioning how it's meant to be!
-
2
-
2
-
-
3 hours ago, Djack69 said:
So I added another Italian chick to the stable ?
How does the Beretta shot?
-
1
-
-
3 hours ago, StrangerDanger said:
4999 for the L3 Harris M914A PVS14 (Thanks Biden)
702 for the MTEK Flux vented Carbon helmet
2895 for the B. E. Meyers MAWL C1 infrared illuminator/laser
430 for the Wilcox G24 mount
228 for the Wilcox dovetail arm
Needless to say, expensive to play.
Dang! The boss would not be happy with me. Looks like a blast though. I got the evil eye about 4 months ago when I was eyeballing a Barret 50bmg.
-
How much did that night vision rig run you?
-
Still waiting on Midway to get me my magpul mags.
-
That's a nice set-up you got there!
-
1
-
-
Speaking of ammo how does the Federal power shock magnum rifled slugs at 1520 fps shot out of the m4.
.jpg.2e4a1a0ac25266b8e10ee5572cbc2dcd.jpg)
M4 14" barrel go!
in Benelli
Posted
I know I asked this before but can't remember where the post went. Finally have the time and money to acquire a 14" barrel for my M4. Where can I acquire one in stock?