BK02
-
Posts
39 -
Joined
-
Last visited
-
Days Won
3
Posts posted by BK02
-
-
Sold to StreetSweeper56
- 1
-
I am looking to sell my benelli m4. It’s the “h2o” with a matching 7 round tube from SocomGuy, the enhanced trigger guard from A&S, 7 round factory magazine spring, and the extended lifter from TTI. Also has one of my charging handles that I make. Will come with the factory charging handle as well as the factory improved choke. Installed currently is a benelli improved cylinder choke. Really now scratches or wear to be found on the shotgun, internally or externally.
It runs good. I’ve put about 100 slugs through it, along with 150 00B, and a lot of target loads. It runs light target loads fine now, when it was new it was pretty sluggish with them. I really like this shotgun, but I recently switched jobs and am needing to fund some other stuff right now. So as of now, I will also not be making or selling anymore charging handles besides the 1 that I have left.
I also have this posted on Gunbroker. Auction ends in 2 days, starting bid of $1850. I will accept $2300obo shipped to your FFL. Really good deal for a simply upgraded m4 with few rounds through it. Payment can be a USPS money order, or PayPal F&F.
- 1
-
8 minutes ago, Ben elLes said:
I’ll take a second one ?
Alright, you got one. One more available
-
I have two available currently. I am planning to make more depending how these sell. A few months back, I made two and sold them to StreetSweeper56 and Ben elLes. They both said that they have been working fine with no issues, besides it being hard to remove in one of Ben elLes’s m4s. I also have had one on my m4 since I started this project and it has been working fine through 100 slugs, 150 00b and over 250 target loads.
I am asking $70 shipped for these. They are turned manually one at a time on my bench top lathe. Once these two are sold, I will take up to 10 orders at a time to prevent getting backed up.
Thanks for the interest in these
- 2
-
32 minutes ago, bh27 said:
I have a t1 laying around, do you think they'll hold up just as well as a t2?
I don’t have personal experience with t1s, but I’ve seen them thrown out of a helicopter on a ddm4a1 by LAV on an older video on YouTube. Glass cracked, dot was still visible and zero was held good enough to hit targets.
-
4 minutes ago, Doge said:
So LE discount is 449$ for the Duty RDS ?.
Battery life is underwhelming but the trade off is the lower price. Think of how many batteries you would need to offset the difference in price to a T-2.
Yeah battery life isn’t really a downside, but what else do you think effected price that much? I bet the glass isn’t as clear as the t2. Or maybe it is, that would be nice to not have to spend $750+ to get clear glass on a red dot.
-
5 hours ago, Doge said:
New Duty RDS. For a rifle, but you can see they are going to a flush adjustment and keypad like from the ACRO P-2. Looks like it can take a T-2 low mount?
That’s interesting. It’s forged aluminum according to their website. Weird how the battery life is less than a t2 considering they already have the technology to get 50k hours. I guess to just save a little money.
-
On 1/5/2022 at 8:33 PM, blfuller said:
Got a 7 shot tube from SOCOMguy installed and in looking at an extended mag spring and I am wondering what the difference is on a 12ga spring direct from Wolff vs the special ones that FFT that they say is made by Wolff that is selling for 5x the price of a Wolff standard XP spring. I cannot see what the big difference is for the extra money. A mag tube spring is not really rocket science. For the cost I think I will try the one from Wolff. Anyone else do the same?
I just use a factory 7 round spring from benelliparts. It works perfectly. And yes, the Wolf spring is probably the exact same one that is being sold by FFT. He overprices everything
-
That’s interesting. My 2021 “h2o” came apart in less than 5 minutes with a small butane torch. The magazine tube that is. Very little, if any, smoke. Didn’t need any tools to twist it off. I then installed SOCOMguys steel 7 round tube and used a large amount of vibratite 123 (high temp/hand tool removal). Don’t plan on ever having to take the tube off, so I used way more than I needed too.
-
On 11/23/2021 at 8:30 PM, Ben elLes said:
I have a second one now ?
I think I will me making a few more charging handles during this thanksgiving break I have, if you need another one. I know you were one of the first ones to message me wanting another one.
-
On 11/20/2021 at 7:57 PM, Ben elLes said:
I’ll just wait patiently…
Did mine not end up working for you? Or do you have more than one m4?
-
-
17 hours ago, Milspec said:
The Rein looks awesome. I know the OWL is made in the USA not sure about their other lights.
All of their lights are made in the USA. I have an owl on my 10.5” 5.56 and my lady has a Rein on her 10.5”. Super nice lights, impressively good throw with also a good amount of spill.
- 1
-
2 hours ago, AJ Lisitano said:
Can you please let me know what the price is including shipping? I may be slow in responding I just got home from having my neck fused this week and hopefully I’ll be able to shoot once the healing finishes.
is PayPal okay?Thank you in advance,
Alan
I charged $65 shipped for the first two I made. I barely get any days off where I work, so might be a couple of weeks before I make any more. Managed to get some 8 hour shifts this last week so had a few more hours at home to actually do something besides sleep and eat. I’ll post here when I make some more to sell.
-
48 minutes ago, StrangerDanger said:
Nice lathe work!
Thanks! Just sent one to Ben elLes and Streetsweeper56. If they fit and work well in their examples, I’ll probably be making some more for others who are interested.
- 1
- 2
-
3 hours ago, Dkay67 said:
So how is it not going to affect him having access to the coatings if it’s being discontinued by the manufacturer...?
-
11 hours ago, Ben elLes said:
So Just received my charging handle and it’s basically flush with the side of the gun. I can’t even fit a piece of paper under it. Can see wear marks just from racking it a few times so I’m not going to use it. Sadly now that I have tried another one I do like how much nicer it is in comparison to the OEM. Looking for recommendations on how to fix this one or one I should blow another 80 bucks on.
(Can see wear marks that rubbed off in the picture, as well as one that wouldn’t after handle was removed)
I would be willing to make you a much nicer one that I guarantee will fit tight and not touch the receiver. It would be polished 17-4 like I’ve posted recently. I’m not sure how hard it is to test fit a charging handle in a gun before you ship out junk, but FFT is a joke. PM me if you’re interested.
- 2
-
7 hours ago, Sigma05 said:
In the pic, what you’re seeing is actually a rubber cover, but yes the scope is made of fiberglass reinforced nylon. The same as the optic that comes stock on the H&K G36.
That’s cool, didn’t see that in my brief research which kind of ended when I read that it was in fact made of a strong type of plastic.
- 1
-
-
2 minutes ago, 31b said:
The charging handle is cool but what about your dog. He is a good looking boy. Is he a Dogo?
Her name is chips. We rescued her about 6 months ago from the Kansas humane society. She’s about a year old now and is a spaz, but a good dog. We think she is a pit bull/lab mix. I try to always have her in the background of my gun pictures to add something special to the picture. She does like to run off after deer that sometimes come into our backyard though, hence the cable we have to use now. Lol
- 1
-
-
10 minutes ago, StreetSweeper56 said:
I call dibs on 1 BK, those are super sharp looking! I don't care about the finish color,I'll Cerakote it anyway. Not sure how I'd get you my contact info but I've bookmarked this thread and I will keep an eye on it till they're done. I love uber-custom work! Paypal ok? Let me know!
I sent you a DM
-
27 minutes ago, 0331FF said:
Following. I am looking for a decent new bolt handle.
I just got some more 17-4 in, planning on making 5 to sell if anyone does want one. I’ll post here once I get them done. Will have them all done by the middle of next week I imagine.
-
55 minutes ago, Accounting4u said:
My new Benelli M4 has an IT21 marking on receiver and barrel. What does this mean?
I believe it means it was made in 2021. Mine has the same markings.
Polished 17-4 m4 Charging Handles
in Benelli
Posted
Ben elLes charging handle didn’t fit in his m4 as expected, because of this I am not going to send the last one out.