BK02

Ben elLes charging handle didn’t fit in his m4 as expected, because of this I am not going to send the last one out.

Sold to StreetSweeper56

I am looking to sell my benelli m4. It’s the “h2o” with a matching 7 round tube from SocomGuy, the enhanced trigger guard from A&S, 7 round factory magazine spring, and the extended lifter from TTI. Also has one of my charging handles that I make. Will come with the factory charging handle as well as the factory improved choke. Installed currently is a benelli improved cylinder choke. Really now scratches or wear to be found on the shotgun, internally or externally. It runs good. I’ve put about 100 slugs through it, along with 150 00B, and a lot of target loads. It runs light target loads fine now, when it was new it was pretty sluggish with them. I really like this shotgun, but I recently switched jobs and am needing to fund some other stuff right now. So as of now, I will also not be making or selling anymore charging handles besides the 1 that I have left. I also have this posted on Gunbroker. Auction ends in 2 days, starting bid of $1850. I will accept $2300obo shipped to your FFL. Really good deal for a simply upgraded m4 with few rounds through it. Payment can be a USPS money order, or PayPal F&F.

Alright, you got one. One more available

I have two available currently. I am planning to make more depending how these sell. A few months back, I made two and sold them to StreetSweeper56 and Ben elLes. They both said that they have been working fine with no issues, besides it being hard to remove in one of Ben elLes’s m4s. I also have had one on my m4 since I started this project and it has been working fine through 100 slugs, 150 00b and over 250 target loads. I am asking $70 shipped for these. They are turned manually one at a time on my bench top lathe. Once these two are sold, I will take up to 10 orders at a time to prevent getting backed up. Thanks for the interest in these

I don’t have personal experience with t1s, but I’ve seen them thrown out of a helicopter on a ddm4a1 by LAV on an older video on YouTube. Glass cracked, dot was still visible and zero was held good enough to hit targets.

Yeah battery life isn’t really a downside, but what else do you think effected price that much? I bet the glass isn’t as clear as the t2. Or maybe it is, that would be nice to not have to spend $750+ to get clear glass on a red dot.

That’s interesting. It’s forged aluminum according to their website. Weird how the battery life is less than a t2 considering they already have the technology to get 50k hours. I guess to just save a little money.

I just use a factory 7 round spring from benelliparts. It works perfectly. And yes, the Wolf spring is probably the exact same one that is being sold by FFT. He overprices everything

That’s interesting. My 2021 “h2o” came apart in less than 5 minutes with a small butane torch. The magazine tube that is. Very little, if any, smoke. Didn’t need any tools to twist it off. I then installed SOCOMguys steel 7 round tube and used a large amount of vibratite 123 (high temp/hand tool removal). Don’t plan on ever having to take the tube off, so I used way more than I needed too.

I think I will me making a few more charging handles during this thanksgiving break I have, if you need another one. I know you were one of the first ones to message me wanting another one.

Did mine not end up working for you? Or do you have more than one m4?

Awesome, glad they fit and function fine on both of your examples!

All of their lights are made in the USA. I have an owl on my 10.5” 5.56 and my lady has a Rein on her 10.5”. Super nice lights, impressively good throw with also a good amount of spill.

I charged $65 shipped for the first two I made. I barely get any days off where I work, so might be a couple of weeks before I make any more. Managed to get some 8 hour shifts this last week so had a few more hours at home to actually do something besides sleep and eat. I’ll post here when I make some more to sell.

Thanks! Just sent one to Ben elLes and Streetsweeper56. If they fit and work well in their examples, I’ll probably be making some more for others who are interested.

So how is it not going to affect him having access to the coatings if it’s being discontinued by the manufacturer...?

I would be willing to make you a much nicer one that I guarantee will fit tight and not touch the receiver. It would be polished 17-4 like I’ve posted recently. I’m not sure how hard it is to test fit a charging handle in a gun before you ship out junk, but FFT is a joke. PM me if you’re interested.

That’s cool, didn’t see that in my brief research which kind of ended when I read that it was in fact made of a strong type of plastic.

I’m sure he’ll be fun to deal with. Lol

Her name is chips. We rescued her about 6 months ago from the Kansas humane society. She’s about a year old now and is a spaz, but a good dog. We think she is a pit bull/lab mix. I try to always have her in the background of my gun pictures to add something special to the picture. She does like to run off after deer that sometimes come into our backyard though, hence the cable we have to use now. Lol

Here are a couple pictures of the handle on my “h2o” m4. There is plenty of gap between the handle and the receiver to prevent scratching of the receiver like with some FFT examples.

I sent you a DM

I just got some more 17-4 in, planning on making 5 to sell if anyone does want one. I’ll post here once I get them done. Will have them all done by the middle of next week I imagine.

I believe it means it was made in 2021. Mine has the same markings.