Arik
-
Posts
3 -
Joined
-
Last visited
Posts posted by Arik
-
-
On 5/12/2022 at 11:57 PM, Arik said:
I also have Sulun TAC12, and I had the same problem, there is no pin fixation either.
I decided as follows: 1. clicked on the pin with a toothpick (orange line) so that it hides in the hole. 2. I tied the toothpick with electrical tape (blue line) to fix it to the barrel so that the pin remained hidden inside.
3. From the side indicated by the arrow, lightly hit with a core to deform the entrance to the hole where the pin is located.
4. Removed the electrical tape and toothpick. fixed
I decided as follows: 1. Press on the pin with a toothpick (orange line) so that it hides in the hole. 2. I tied the toothpick with electrical tape (blue line) to fix it to the barrel so that the pin remained hidden inside.
3. From the side indicated by the arrow, lightly hit with a kern to deform the entrance to the hole where the pin is located.
4. Removed the electrical tape and toothpick. Fixed!I mean " 1. PRESS the pin with a toothpick (orange line) so that it hides in the hole. "
-
On 20.02.2022 at 03:26, SolidBuilt said:
У меня есть клон Benelli M4, и стопорный штифт и пружина крышки магазина выпали сегодня, когда я разбирал / чистил свое ружье. Такого еще никогда не было.
Я также заметил, что сзади нет «входного» отверстия… так что Сулан Армс, должно быть, просто как-то вставил это внутрь. (Это sds tac-12.... очень хорошо стреляет).
У меня есть фотографии, но я не могу понять, как разместить/поделиться...
I also have Sulun TAC12, and I had the same problem, there is no pin fixation either.
I decided as follows: 1. clicked on the pin with a toothpick (orange line) so that it hides in the hole. 2. I tied the toothpick with electrical tape (blue line) to fix it to the barrel so that the pin remained hidden inside.
3. From the side indicated by the arrow, lightly hit with a core to deform the entrance to the hole where the pin is located.
4. Removed the electrical tape and toothpick. fixed
I decided as follows: 1. Press on the pin with a toothpick (orange line) so that it hides in the hole. 2. I tied the toothpick with electrical tape (blue line) to fix it to the barrel so that the pin remained hidden inside.
3. From the side indicated by the arrow, lightly hit with a kern to deform the entrance to the hole where the pin is located.
4. Removed the electrical tape and toothpick. Fixed!
-
1
-
Design Concepts Lightweight Charging Handle
in Benelli
Posted
All you need is to find a turner and some titanium bar. I made these two handles myself, one of the original shape, but weighs half as much as the original. The second enlarged, weighs the same. The enlarged one has a fine thread on top to increase friction.