Jump to content

Arik

Members
  • Posts

    3
  • Joined

  • Last visited

Arik's Achievements

Junior Member

Junior Member (1/3)

3

Reputation

  1. All you need is to find a turner and some titanium bar. I made these two handles myself, one of the original shape, but weighs half as much as the original. The second enlarged, weighs the same. The enlarged one has a fine thread on top to increase friction.
  2. I mean " 1. PRESS the pin with a toothpick (orange line) so that it hides in the hole. "
  3. I also have Sulun TAC12, and I had the same problem, there is no pin fixation either. I decided as follows: 1. clicked on the pin with a toothpick (orange line) so that it hides in the hole. 2. I tied the toothpick with electrical tape (blue line) to fix it to the barrel so that the pin remained hidden inside. 3. From the side indicated by the arrow, lightly hit with a core to deform the entrance to the hole where the pin is located. 4. Removed the electrical tape and toothpick. fixed I decided as follows: 1. Press on the pin with a toothpick (orange line) so that it hides in the hole. 2. I tied the toothpick with electrical tape (blue line) to fix it to the barrel so that the pin remained hidden inside. 3. From the side indicated by the arrow, lightly hit with a kern to deform the entrance to the hole where the pin is located. 4. Removed the electrical tape and toothpick. Fixed!
×
×
  • Create New...