Jump to content

sas-M2T

Members
  • Posts

    8
  • Joined

  • Last visited

Everything posted by sas-M2T

  1. What sort of difficulty exactly are you having? Too difficult to overcome the spring tension in the magazine tube? Cartridge nose not entering the magazine? Just what?
  2. @Remarkable: I am thinking about buying a Benelli #80155 (+2) extension for my M2. You have written in the past that oftentimes a magazine extension is the cause of a bent carrier. Would the spring included with the #80155 kit have the correct calibration to prevent problems with the carrier in my M2?
  3. Hope that the info at this website can give you some idea of the reduction of velocity between a 24" and 22" barrel in the 308 Win. 308 Winchester / 7.62x51mm NATO: Barrel Length versus Velocity (28″ to 16.5″) – rifleshooter.com
  4. I believe that I have seen other posts about this, and the answer was that the shell carrier/lifter was out of adjustment or bent just a little bit. Search around and see if you can find the answer and the fix.
  5. That is an extremely odd failure, you wouldn't think that there would be any side-stresses that would affect that part inside the tube. Appears to be a MIM or potmetal part, but even then, odd fracture.
×
×
  • Create New...