Jfryan87 Posted November 10, 2021 Share Posted November 10, 2021 Recently purchased a Lupo along with a Harris bipod. The bipod attaches to the sling stud however I do not have a sling stud. The pre drilled hole has a cap on it... Two questions 1) Should the rifle come with a sling stud? 2) How do you remove for fore-end cap? Quote Link to comment Share on other sites More sharing options...
JDM Posted December 9, 2022 Share Posted December 9, 2022 Heard anything yet I would like to add a bipod but cant find anything on the subject Quote Link to comment Share on other sites More sharing options...
HHT Posted March 2 Share Posted March 2 (edited) My Lupo didn’t come with a swivel but the importer in the UK sent me one when I enquired how to fit a bipod AND a sling. The cap will prise off with a bit of care. I was going to remove the fore end and push it out from the inside but thought I’d have a go with the crude way first. I was about to give up as it was resistant and I’d done no damage when it flew across the room! It is a little more than a cap - there’s a longish spigot attached to the cap that goes down a narrower hole. I’m still not sure whether it’s possible to push from inside but if you concentrate on bruising the cap rather than the fore end you should be okay with a small electrician’s screwdriver. Just screw the swivel in and you’re done. I absolve myself of any blame if it all goes wrong for you. Just take your time and be careful where you push! Edited March 2 by HHT Clarity Quote Link to comment Share on other sites More sharing options...
HHT Posted March 8 Share Posted March 8 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.