Leaderboard

The frame counts as a compliance part as well as the trigger, hammer and disconnector. So you’ve got four parts in the bag with this swap. Magazine tube and magazine follower and you have a bit of breathing room.

You need to determine if the stock's adjustment button allowed the stock to twist on you when firing. I'd want to inspect the stock to see if any of the pins that lock the stock in place are damaged. This damage could also be on the button itself. If the receiver extension is moving around under recoil, it's dangerous and should be addressed. It's just a matter of time before it twists during recoil and you get socked in the eye by the rear sight assembly. I'd highly recommend fixing it yourself, having Benelli address it or sending it to me. I would not let a general gunsmith try to fix it. I'd remove the stock and pistol grip and get a good look at the jam nut that retains the receiver extension to the receiver. See if there are any signs of movement. If you're handy and not afraid of a MAPP torch and buying a few specialty tools that you likely don't have, I could walk you thru the repairs. I can give you my cell number to text or call if you want to go that route.