[sidearmor rail fit question]

decisions, decisions I guess I'm in for a couple months of deep contemplation and trial & error (looking forward to it though) I'll post results as things progress. Thanks Again for all the great info I think it's already saving me some steps

[sidearmor rail fit question]

the "easy to knock off" part doesn't sound too good.

Here's another mount I found on the Magpul site you can use with the standard tape switch

 

http://www.magpul.com/catalog/index.php?main_page=product_info&cPath=76&products_id=221

[sidearmor rail fit question]

Your right I did misunderstand. Thanks for the link thats what I'm looking for but I might go with the rail mount switch here:

 

http://www.surefire.com/Remote-Dual-Switch-for-WeaponLight-SR07

 

and do something similar to Infidel's switch placement but I'll wait till I have the SideArmor set up on the gun and do some playing around with some of the tac lights and switches I have for my ARs

 

Thanks Again,

Hookster

[sidearmor rail fit question]

I've been looking at this SureFire Scout:

 

http://www.surefire.com/M620C-ScoutLight

 

It comes with their own throw lever mount which I'm sure would be of good quality like most of their stuff but I'm wondering how it'll do with an out of spec rail. The price is 525. but if it worked fine it would save me paying 400+ for the LaRue on top of the price of a LED Scout. Anyone with any experience with a SureFire throw lever mount?

 

Hookster

[sidearmor rail fit question]

Thanks for all the great pics. I think I'm going to get the SureFire Scout as well and then play around with the switch mounting and location. Question: Did you get the LaRue light mount because of a problem with the SureFire mount (either the thumbscrew or throw lever) working well on the SideArmor rail?

 

Thanks,

Hookster

[sidearmor rail fit question]

Thanks StrangerDanger, I enjoyed your previous detailed review of the SideArmor rail. How did things go with the mounting of the switch for the SureFire Scout go? Any Pics?

[sidearmor rail fit question]

I'm thinking of ordering the sidearmor rail system but I notice they list it as being for M4/1014 does anyone have first hand experience putting one on a 11707 or know any reason that there would be a fit issue?

 

Thanks,

Hookster

[Benelli M4 -- Front Sight Nut]

I recently ordered a 5.5mm wrench to install my meprolights through Amazon for $5.45 Here's the link to it.

 

http://www.amazon.com/Wiha-Metric-Wrench-5-0mm-5-5mm/dp/B000IBOOBM

 

They shipped it right away. A 7/32 wrench also fits but the 5.5mm fits better. If you have a local Sears you can get one there but you have to buy a whole set of ignition wrenches for $19.95. They don't sell them seperately.

[Nordic +3 for M2 tactical holds 2 rounds]

FYI I recently needed a new spring for my M1S90 with a +3 extension. Sure Cycle sold me the spring alone that goes with their +3 for $15. Works great!

[Front sight question]

That seems pretty strange, You weren't able to adjust them to a zero without bottoming out the elevation adjustment? I was wondering why the front sights have the additional side to side adjustment with the little marks when the windage adjustment is on the rear sight?

[Front sight question]

Thanks Alisske, I'll give that size a try when the sights arrive. I was thinking of using a little blue LocTite also for good measure.

[Front sight question]

Hey All, I will be switching sights on my M1S90 to some Meprolights. I was wondering if anyone knows the proper size wrench for the small nut that secures the front post? I assume it's metric. Thanks in advance.

 

Hookster

[M4 Eye Candy -- Enjoy]

this DSA one looks like "stubs" on the top and 1913 on the side rails

 

http://www.dsarms.com/Benelli-M4-Quad-Rail-Handguard/productinfo/BT21353/

[3 dot sight for Supernova]

click on this

 

http://www.meprolight.com/default.asp?catid=%7B61963421-C6A2-4076-8851-18AC2265EC5E%7D

 

I just ordered a set for my M1S90

[An AR15 question]

There are a lot of choices out there these days. Do you know if you want to go flat top or carry handle? railed front end or standard handguards? Do you want to run optics on it? My latest upper that I bought is a Smith and Wesson M&P 15T flat top with Troy Industries quad rail 1/9 barrel since I usually shoot 55gr PMC etc. I'm very happy with it.

[M1 Tactical Shotgun]

Hey Trooper

Numrich has the chokes (IC,Mod and Full) in stock and the wrench as well. Here's the link

 

http://www.e-gunparts.com/products.asp?chrMasterModel=4150zM1%20SUPER%2090%20MILITARY%20AND%20POLICE&MC=

[M1 Tactical Shotgun]

I downloaded a manual from this link:

 

http://safemanuals.com/user-guide-instructions-owner-manual/BENELLI/M1%20SUPER%2090-_E

 

It's free

[An AR15 question]

Hey Huklbrry,

Here's a link with some good info

 

http://forums.officer.com/showthread.php?t=81462

[An AR15 question]

As long as you buy an assembled upper receiver that would be all you need. If it didn't come with its own bolt carrier and charging handle you can just use your existing ones. Do you have a particular brand/configuration in mind?

[An AR15 question]

No Problem, just pop out the 2 pins and put on a new upper assembly pop the pins back in. Less than a minute, good to go. I have several uppers and a couple lowers and switch stuff up all the time. If you have a very old AR before they had the detent loaded pin in front you might need an offset pin up front

[FYI: Adding accessories to an M1...]

Anyone out there with first hand experience with a SureFire forend and an extended mag at the same time? Problems?

 

Thanks

[FYI: Adding accessories to an M1...]

Found it! Thank You Sir

[FYI: Adding accessories to an M1...]

Hey Jantonio,

I'm a lifelong shooter but Benelli noob. I just picked up the same setup. M1 tactical 18" with pistol grip stock and extension. If I add a SureFire weaponlight forend am I likely to run into cycling problems running Remington 2 3/4 00 if I stick with the stock spring?