-
Posts
183 -
Joined
-
Last visited
Posts posted by Tango two
-
-
-
[ATTACH=CONFIG]1266[/ATTACH]
Also available from BenelliUSA for $2069.
-
When you picked it up at the dealer,did you inspect it?
Did it come boxed with the manual and anything else?
HERE'S a link to some pics to show what it should look like.
Which M2 is it?
-
-
I would like to add one to my M4, but want to make sure this does not bring me into SBS range...
Thanks!
It won't.
Do you think all of the buyers of the collapsible stock are inviting a visit from the ATF??
-
Are these barrels on GB drop in replacements for the factory 18.5"
and will they fit a standard M4 shotgun that's for sale to civilians?
The barrels on GB(14") are Benelli factory barrels
Thanks
Regardless of the fit, all NFA rules are applicable.
-
He just provides POOR customer support.
My $.02
I'm interested to know if the OP has any thoughts to the rebuttals that have been posted in response to his "$.02"?
-
Benelliusa hasn't made provisions for pistols on this forum.
-
How did the trade take place? Forum?
-
I personally feel that it is a fine set-up. Tight fit with no play, and the finish was fine as well. Granted, it's heavier than the factory handguards, but the fact that I removed the factory rail and also installed a titanium magazine tube offset a lot of that.
I'm much obliged.
-
Yours is the first photo of a mounted KZ forearm that I've seen.
What's your opinion the fit and finish?
-
It's not listed on the benelli.it website.
Try contacting them there.
-
Which Sport?
-
I also saw there is a dvd called Mastering the Combat Shotgun which is supposed to go through dissassembly of the M4 and wondered if anyone was familiar with it and if it would be worth purchasing.
If the DVD you're referring to is the one with Lenny Magill, I've read mostly negative reviews.
The DVD set to consider is the Magpul Art of the Dynamic Shotgun.
Good reviews.
I'm not sure if it includes a maintenance section.
-
Here's a link for the thread Cleaning The Benelli M4?
Enjoy your new long gun and welcome to the forum.
-
I found that and it's not it. But thanks
Are you going to share what it is?
-
Hi again,
Oh yes I am a great fan and user of Benellis firearms such as the SBE, SBE2, Montefeltro, Argo, the M1 and M3. Hence that is why I snagged the B76. Sorry if I landed in the wrong place. I was looking to buy a couple more B80's and B76's. I think I have about 20 Benelli shotguns and rifles currently. Thanks
bow and arrow
Only twenty?
-
Hi all just joined up this morning! I am looking for some information on the B76 and B80 pistols. I just got a B76 and it's fantastic! Any other folks out there?
Greetings.
I don't believe that BenelliUSA has made forum provisions for their pistol owners.
Any chance that you're a Benelli long gun owner too?
It's no surprise that your B76 is fantastic.
Enjoy it.
-
p.s. don't waste your time watching it.
This is like a car accident.
You just have to check it out.
-
I tried to make a reconstruction of your jamming problem. I`m glad that your M4 is good to go, too.
The pics that I took aren't very detailed.They're attached to the beginning of this thread.
BTW-If you had successfully jammed up your M4 you would have needed to send it to Benelli for repair.
-
Glad it's back and ready to rock and roll for you.
Thanks. I'm good to go.
-
I mean scratches in the receiver from the jammed locking head. It would be great to know where exactly the bolt locking head was....I have tried to jam my M4 in the same way, but I don`t success.
Why would you try to jam the locking head into the receiver??
-
Can you post some pics of the dents where the locking head jammed inside the receiver?
What dents?
-
I thought you had the barrel removed? I'm not sure what they were saying was stuck.
The barrel had been removed.I was replacing the forearms with the barrel in place when the locking head became jammed.
My Benelli M4
in Benelli
Posted
There's a wealth of information on this site.
Did you make your modifications based on something else?