NatArmsUSA

Unfortunately, from what i hear is that the Benelli Brand in the US is handled by one of the owners sons and Beretta by the other, hence the difference in Service between the two sister Companies here in the US.

Please review the independent topic posted below, it includes details of what i found was wrong and how i resolved it. http://forums.benelliusa.com/showthread.php/32814-Benelli-M3-Super-90-Bolt-Stuck-(won-t-go-forward)

thanks for the response, problem was solved, no i have not done any alterations or upgrades

Thank you for the effort people i managed to have a friend help me work around the issue and we have managed to resolve it. Ill share what little i learnt for others reference. 1. During Reassembly: While inserting the Trigger Group Assembly (part 9101 however has many names used in the manual e.g. 'protection cover unit') the 'hammer' (part 9102) must be cocked, the bolt release button must remain pressed so that the 'carrier latch spring' (part 9058) acting as a lever pushes inwards towards the receiver frame, so it creates an open passage for the Trigger Group Assembly to be inserted. 2. This 'carrier latch spring' if not pressed inward, will go over the 'cartridge drop lever' (part 9076) or some other part of the trigger assembly which when the bolt is cocked will jam the parts and the 'bolt release button' won't depress the 'carrier latch spring'

http://forums.benelliusa.com/group.php?groupid=30 Thanks VertigoFirearms and BLACK: Please check out the pictures i have added to the group above, they include pictures of the bolt and some internals that were visible through the Ejection Port

was this problem solved?

I own an M3 Super 90, I reassembled my gun, bolt cocked and did not release, now i cannot disassemble to look at the problem and the Bolt does not release either. Please tell me how you solved your problem some pic video may be even greater help thanks

could you give me a picture regarding this bolt lock tab? i don't know for sure what part you are referring to

please post the link to that thread, if its a similar problem and solution for mine.

Please assist me, i can't seem to get the bolt release button to press and release the bolt

Recently put an M3 Super 90 to the test. Initially i was having trouble with the Gun in Semi-Auto mode, so stuck to Pump Action, which is hard to use during a quick shoot for Quail. I think breaking in is a must for these guns. Hoping it would fire well after the 1st shoot and cleaning. So cleaned and reassembled, now stuck with a new disaster, the BOLT IS STUCK i.e. it won't go forward from the cocked position. The Bolt Release Button won't push in either. Hope some of you seasoned Pros can assist me.

Hi, Newbie here, I received a Benelli M3 Super 90 and finally put it to some use. Initially i was having trouble with the Gun in Semi-Auto mode, so stuck to Pump Action, which is hard to use during a quick shoot for Quail. I think breaking in is a must for these guns. Hoping it would fire well after the 1st shoot and cleaning. So cleaned and reassembled, now stuck with a new disaster, please guide me as to which topic in the Forum i can post this issue for assistance. Thanks