Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Benelli Forums
NTSOS

M4 Fieldstock

Recommended Posts

To remove/replace the stock, do you remove the 053J stock retaining nut or the entire 280J stock retaining pin/assembly?

 

107432537.jpg

 

Thanks! :)

 

John

Share this post


Link to post
Share on other sites

NTSOS,

 

To remove the stock on the M4, you do not have remove any nuts or bolts. The only thing you have to remove is the trigger assembly, then the whole stock will screw off from the receiver. Hope this helps,

 

Jeremy

Share this post


Link to post
Share on other sites
NTSOS,

 

To remove the stock on the M4, you do not have remove any nuts or bolts. The only thing you have to remove is the trigger assembly, then the whole stock will screw off from the receiver. Hope this helps,

 

Jeremy

 

Hi Jeremy,

 

Oh, ok..........thanks so much! :)

 

John

Share this post


Link to post
Share on other sites
Your welcome, glad I could help.

 

Hi Jeremy,

 

Refering to my previously posted figure 6 drawing, I just noticed that my M4 11707's recoil pad does not even have the self threaded screw as pictured in the drawing. I have the pistol grip stock assembly (160J) and my Benelli M4 Super 90 manual has only the instructions/photos for the telescoping stock assembly.

 

Anyway, I'm slightly confused as I was wondering if you knew what the pieces and parts in the whatever version M4 parts list that I have posted actually do and does my M4 have any of those parts?

 

Thanks again! :)

 

John

Share this post


Link to post
Share on other sites

John,

 

Your pistol grip has every part shown. The screws are kinda hard to see because they are behind two very tiny holes in the pad on the back of the stock, but they are there. However, none of those parts need to be removed to get your stock off, the only thing you need to remove is the trigger assembly, which is simply held in place by the retaining pin on the side of your receiver. After the trigger assembly is removed, the whole stock, grip and all, will simply unscrew from your receiver. Your field stock should go on the same way. Hope this helps,

 

Jeremy

Share this post


Link to post
Share on other sites

Hi Jeremy,

 

So the screws *are* actually there.....ok!

 

Yes, I understood from your first post that I had to remove the trigger assembly.........I just wanted to understand what those particular parts did.

 

Ok.....thank you again! :)

 

John

Share this post


Link to post
Share on other sites
Yes they are there, you just really have to look hard. So did you get your field stock on?

 

Not yet.......it hasn't arrived..........I also would like to get Cleefurd's stock as I would like to experience the performance differences for myself.

 

John

Edited by NTSOS

Share this post


Link to post
Share on other sites
you should post a picture of it once you get the field stock on. Never seen one with a field stock.

 

Hi Nikolai,

 

It's not mine, but it will look about the same.

 

107477410.jpg

 

John

Share this post


Link to post
Share on other sites
Wow, I must say i think it looks better with a field stock. Thanks for posting a picture!

 

I agree.......this is kind of a nice combo:

 

107509973.jpg

 

John

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...