awesomeame Posted November 25, 2009 Posted November 25, 2009 Does benelli sell a magazine plug for the m4? Gotta bring it down to 2 rds in the tube Matt Quote
agm65ccip Posted November 25, 2009 Posted November 25, 2009 Does benelli sell a magazine plug for the m4? Gotta bring it down to 2 rds in the tube Matt Go to a hardware store and get a 3ft long 1/4" dowel rod for $1 and cut to fit. Cheap and easy. Quote
awesomeame Posted November 27, 2009 Author Posted November 27, 2009 Do you think that will rattle around and make noise? Matt Quote
agm65ccip Posted November 27, 2009 Posted November 27, 2009 Do you think that will rattle around and make noise? Matt It does make a little noise, but it really is up to you on how much noise is acceptable. I have a dowel rod plug in my extended M2 and it only makes the noise of the rod sliding up/down the spring when I point the muzzle at the sky or at the ground. The deer I hunt don't seem to notice (I'm assuming hunting is the reason you would need to limit to 3). The other side of that is when you are fully loaded (3) the plug is very close to the follower so it doesn't have much room to travel to make noise. Unless you get leads on real plugs I would try it out, the worst that could happen is you are out $1 and a bit of time. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.