quiglee Posted April 15, 2011 Share Posted April 15, 2011 Hello everyone, I just purchased a supersport , technically it's used but it has not been fired. When I recieved it in the mail the first thing I noticed was It didn't feel right when I held it and looked down the barrel. Thats when I realised the cast was off to the right. It came with all the shims and stock plate. I have never had to adjust a stock before and after downloading the owners manual I have a question. It tells you what drop shims and plate to use for right and left adjustments but if I want to leave it straight do I just leave the shims and the plate out? It's obvious someone has put them in there, but I have no idea what the setting looked like from the factory. Any advice you can give me would be appreciated....Thanks Quote Link to comment Share on other sites More sharing options...
quiglee Posted April 27, 2011 Author Share Posted April 27, 2011 What a forum this is. I'm so glad I joined Quote Link to comment Share on other sites More sharing options...
tucker301 Posted April 27, 2011 Share Posted April 27, 2011 It would have helped if you had given your thread a better title. Something like, "Supersport - Cast Question" The steel locking plates are drilled off-center to create either a cast on or cast off configuration for RH or LH shooters. If you want it cast neutral, you will have to either modify an existing plate or have a new one made with the hole in the center. Any good machinist can accommodate your needs. Quote Link to comment Share on other sites More sharing options...
quiglee Posted April 27, 2011 Author Share Posted April 27, 2011 I appreciate the reply. I am a right handed shooter and figured out how to adjust the cast to the least I could. I would still go with neutral if it was possible. I still wonder why they make it right or left and don't supply neutral shims and plate.....Thanks Quote Link to comment Share on other sites More sharing options...
tucker301 Posted April 27, 2011 Share Posted April 27, 2011 I still wonder why they make it right or left and don't supply neutral shims and plate.....Thanks http://www.billhanusbirdguns.com/archive08.html Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.