Urbansherpa Posted January 10, 2013 Share Posted January 10, 2013 Subsequent to my previous post I a trading buttstocks with a forum member. I'm getting his Comfortech for my collapsible. Can anyone tell me the correct procedure to get the stock off? The manual is not with me right now, but I seem to remember it saying to "push the button REAL hard" and it should come off. Any other tricks to accomplishing this? Thanks Quote Link to comment Share on other sites More sharing options...
heckler&kochp2000 Posted January 10, 2013 Share Posted January 10, 2013 Lay it down in the ground and use something like a screwdriver socket to depress it in all the way !!while pulling it out! Quote Link to comment Share on other sites More sharing options...
PCFIVEZ Posted January 10, 2013 Share Posted January 10, 2013 (edited) read my post #17 here... http://www.benelliusa.com/forum/showthread.php/28820-Collapsible-stock-issue?p=173069#post173069 reverse the hammering direction of course. also, don't forget that you can return the clamp and mallet to home depot once you are finished. Edited January 10, 2013 by PCFIVEZ Quote Link to comment Share on other sites More sharing options...
Urbansherpa Posted January 11, 2013 Author Share Posted January 11, 2013 Thanks for the advise, I wasn't about to hammer a Benelli backwards to get the stock off. Turns out there is a hex screw within the buttstock. I took it out and things went much easier. Honestly, after seeing that hex screw I don't think a mallet would have made a difference. Thanks for the advise, though. Quote Link to comment Share on other sites More sharing options...
PCFIVEZ Posted January 11, 2013 Share Posted January 11, 2013 Thanks for the advise, I wasn't about to hammer a Benelli backwards to get the stock off. Turns out there is a hex screw within the buttstock. I took it out and things went much easier. Honestly, after seeing that hex screw I don't think a mallet would have made a difference. Thanks for the advise, though. did you reattach that hex screw once the stock was on? Quote Link to comment Share on other sites More sharing options...
Urbansherpa Posted January 12, 2013 Author Share Posted January 12, 2013 did you reattach that hex screw once the stock was on? I took the buttstock off after discovering the hex needed to be backed out. I then reinstalled the hex as I am giving it to another forum member. He's giving me his Comfortech in return. It is more in keeping with my needs. I didn't realize until reading posts here how 'in demand' the collapsible stock is in the USA. (I live in Canuckistan). Over this side of the border the gun laws are different.....some better, and some worse. A collapsible stock on my 14" barrel SG is not a problem. I put the money down and walk out 5 minutes later. We are both getting a great deal! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.