Florida Boy Posted February 18, 2006 Share Posted February 18, 2006 I know how to set the cast for left or right (drop too), but how can the cast be set for neutral? There's not a shim for that position. Leaving out the forward shim would not correspond with the rear shim which is either a left position or a right position with no hole in the middle for neutral. Something would have to give and that might not be good. Quote Link to comment Share on other sites More sharing options...
M1014 Posted February 19, 2006 Share Posted February 19, 2006 good Q,,,maybe someone here will chime in that knows about the shimming,, Quote Link to comment Share on other sites More sharing options...
tucker301 Posted February 19, 2006 Share Posted February 19, 2006 To my knowledge, no one makes a neutral locking plate, but it appears that it would be a pretty simple thing to fabricate. Hard way would be with some plate stock, a drill, and a dremel or grinder. Possibly more easily accomplished with a pirhanna. If I get some free time at work this week, I just may give it a shot. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.