922r Compliance Question

[khicks0906]

From what I've read about 922r compliance, if I replaced the pistol grip stock on my Benelli M4 with a collapsible stock, I need to also replace 4 parts to be compliant.

 

What about if I replace the pistol grip stock with a straight stock? Would I still have to replace 4 parts since you can buy the M4 with a straight stock?

[ohbejuan]

Pretty good faq here:

 

http://freedomfightertactical.com/922r-faq/

 

I believe the basic answer comes down to the total imported parts count on your gun.

[frigatecon]

You have to replace four parts with the collapsible stock because the stock and the pistol grip are two physically separate parts. They are only one part with the standard pistol grip stock. The straight stock will only require 3 compliant parts.

[khicks0906]

Great! Thanks guys!

[heckler&kochp2000]

If just changing the stock to a collapsible stock you need to just change 1 extra part. Again this is if your are only changing the stock to a collapsible stock and leaving the magazine as the stock 5 round magazine.

[khicks0906]

Yes, that is correct. But in my case I am not going with the collapsible stock, but rather the straight stock. The way I understand it is this still keeps me having to replace only 3 parts for 922r compliance.