828U sport stuck trigger assembly does anyone know how to fix it and get it out of the gun

[Cole peck]

My 828U over and under shotgun has a stuck trigger mechanism half in and half out of the gun does anyone know how to get it out of the gun without having to send it back to Benelli 

[remarkable]

Please send me a PM, I will try to walk you through it.  Basically you will need to remove the stock from the gun then reaching into the reciever with a fine tool and  depress the trigger guard latch.  If you have another 828U you could look at that would be og help, otherwise I can get you a few photos Monday.

[hudd1988]

Hi I have a 828u sport and didn't release the top lever and now the trigger assembly is stuck out and can't get it back I'm, the gun is borrowed and need to be returned in 2 days, any help appreciated.

[remarkable]

PM Sent

[Don fogal]

I have the same issue can you pls sent info mentioned above

[Ron 12 guage]

I have a 828 U Sport that I accidentally pushed the release lever back to the right during the removal of the trigger assembly.  Now the trigger assembly is partially out and I am unable to remove or push back in.  Any help would be appreciated.

[StreetSweeper56]

Lol! Wow, apparently this is a common problem.

[Tjohnson]

I have the same issue trigger assembly is partially out.  Any help is much appreciated!

 

 

[Andrew Goodacre]

I also have a 828U , the trigger assembly came out first day I used it . I sent it back to Benelli for repairs. It took it out yesterday about twenty shells later same thing . This shot gun is a piece of shit . I’m now looking for someone to repair it and then I will dispose of it . A Goodacre 

[jdb47]

I have the same issue. Can you send me the instructions to reset?

 

[Parker S.]

Did anyone figure it out? This just happened to me. I have the gun fully stripped down now and need to figure out how what I need to do.

[remarkable]

PM Sent

[NicT]

This now just happened to me as well. Would you guys mind sending me instructions as well?

[jsr1014]

wow!

 

[PBFitz]

Same issue.  I have the stock removed.  Just need an explanation of how to proceed.  Please forward instructions ASAP

[PBFitz]

Hello All - REMARKABLE totally helped me with this.  My trigger system was totally jammed - due to my stupidity- I did everything wrong.. and paid the price ..  I needed to remove the steel locking plate (held in by the plastic locking block on the floor of the receiver) & once out, I could manually press in the firing pin hammers manually.   Once that was done, I could muscle the trigger group back into position and lock it back into normal position.. it does take some pressure, but nothing violent.  Very happy for the support and guidance.

[EWBSA]

I am new to this forum, and can't send a PM. I could use the instructions to fix a stuck trigger on my 828U.

[Mdreyer4424]

Hi- can someone please send me the instructions as well asap? 
[email protected]

 

thanks!

[olafur]

I have the same issue trigger assembly is partially out. Please send me info how to fix the problem.

[StreetSweeper56]

Everyone please note the header article:

Need Help with Your Benelli Firearm? Here's How to Get Technical Assistance!

• Thank you!

[ToniMeloni]

I need some help, please. While trying to disassemble my Benelli, the trigger mechanism got stuck and I can neither pull it out nor push it back in. I have already removed the breech plate, but I'm stuck now.

Could anybody send me instructions on how to fix this?

Thank you in advance.

[StreetSweeper56]

Welcome to the Benelli Forum! We're here to support you in getting the most out of your Benelli firearm. If you have technical questions or need assistance, here are the best ways to get help:

 

1️⃣ Call Our Tech Services Team

Our knowledgeable team is ready to assist you with any technical issues or questions. Give us a call at (800-264-4962 ext 2) during business hours for expert advice.

 

2️⃣ Use the "Contact Us" Page on www.benelliusa.com

Submit your questions directly through the "Contact Us" form on our website: here. A member of our team will respond promptly to help.

 

3️⃣ Explore Our YouTube Channel

We’ve created a library of instructional and troubleshooting videos on our official YouTube channel. Check it out here: Benelli USA YouTube Channel. You’ll find detailed guides to help you maintain, operate, and optimize your firearm.

 

We’re here to ensure your Benelli experience is always top-notch. Don’t hesitate to reach out!

 

#BenelliForum #BenelliTechSupport #BenelliFirearms
 

[ToniMeloni]

Hi StreetSweeper56 ,

Thank you very much for your reply. Since I am based in Europe, I am unfortunately unable to use your telephone support service. I have already browsed your YouTube channel but, unfortunately, could not find a video relevant to my specific issue. I was hoping to receive some assistance, as it appears that the user "remarkable" previously provided instructions—upon request—regarding the problem with the stuck trigger resulting from improper disassembly.

Do you perhaps have any advice on where I might be able to find such instructions?

Thank you very much.

Edited May 13 by ToniMeloni

[StreetSweeper56]

36 minutes ago, ToniMeloni said:

Hi StreetSweeper56 ,

Thank you very much for your reply. Since I am based in Europe, I am unfortunately unable to use your telephone support service. I have already browsed your YouTube channel but, unfortunately, could not find a video relevant to my specific issue. I was hoping to receive some assistance, as it appears that the user "remarkable" previously provided instructions—upon request—regarding the problem with the stuck trigger resulting from improper disassembly.

Do you perhaps have any advice on where I might be able to find such instructions?

Thank you very much.

I'm sorry, I do not own that model, hopefully remarkable will be along as he, and others are very knowledgeable.