Jump to content

Trick to allow 4 shells in the mag of an SBE.


BenelliSBE

Recommended Posts

It should say in the manual, my Benelli has it in there. Basically if you take the barrel off along with the retaining nut you should see a horseshoe shaped retainer with two small holes next to the split. You heed to compress this retainer using a pair of needle-nose pliers. Make sure that you are careful because there is quite abit of pressure behind it (you will need to keep pressure on it with your finger until you can slowly start to let it off, probably wear a pair of glasses while doing this just to be safe). when you get it off you should have access to the plug, which is the 3 inch or so piece of plastic. take it out and reassemble and your set!

 

Let me know how it goes

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...