royc Posted July 17, 2008 Posted July 17, 2008 4 yo gun has worked fine with 7/8 oz skeet loads now will not cyle second shell from magazine to chamber. Should I replace magazine spring 064c or recoil spring 054b? Any suggestions appreciated. Where to order etc. Thank you Royc Quote
dagrizz Posted July 17, 2008 Posted July 17, 2008 4 yo gun has worked fine with 7/8 oz skeet loads now will not cyle second shell from magazine to chamber. Should I replace magazine spring 064c or recoil spring 054b? Any suggestions appreciated. Where to order etc. Thank you Royc I would start by cleaning the recoil sproing in the but stock and also clean the tube that it slides in. When that spring gets gunked up, the added friction will cause it to not cycle reliably. Mike Quote
Matt D Posted July 18, 2008 Posted July 18, 2008 Check and clean the mag spring and tube they can get gunked too. Quote
shooter_tim Posted July 18, 2008 Posted July 18, 2008 +1 on the magazine spring....I use a tica brush for that, myself +1 on the recoil spring Also take the bolt apart clean and lube that area as well Quote
RedLegsId Posted July 21, 2008 Posted July 21, 2008 Forget the cleaning... Order a SureCyle System from Jeff Hajjar.. SRM Performance Parts. Check the system out. You'll never have a problem again. surecycle . com Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.