bensbe12 Posted February 14, 2008 Share Posted February 14, 2008 I picked up my friends dad’s (died 2yrs ago) 20 ga reloader and supplies (fed 209 primers, rem rxp20 wads, win ball 473aa power 10lbs, no hulls!! can I use win AA hull with this power and primers? I can't find any recipes for the supplies that I have and he doesn’t know. What grain might I be throwing because he had a lot of bushings and bars with it for 12ga and 20 ga any help would be great? THANKS IN ADVANCE Quote Link to comment Share on other sites More sharing options...
10Gauge Posted February 16, 2008 Share Posted February 16, 2008 bebsbe12, the RXP20 wad is a 7/8oz wad so that's your max with this wad! i'd ditch the old powder, pic up some Rem SP20 wads and make the following field/target loads; Hull: Federal Plastic Hunting "paper basewad" Load: 7/8 oz Powder: Universal Clays Charge: 18.0 grs Primer: Fed209 Wad: Rem RXP20 Velocity:1259 fps MEC Bushing: 23 Hull: Federal Plastic Hunting "paper basewad" Load: 1 oz Powder: Universal Clays Charge: 19.5 grs Primer: Fed209 Wad: Rem SP20 Velocity:1212 fps MEC Bushing: 25 These loads come from the Lyman 4th Edition Shotshell Reloading Handbook. I've been using the Hodgdon Universal Clays for many of my 16 gauge reloading and it is a very good powder. Buy this book it has a ton of usefull info regarding your MEC loader! BTW- MEC single stage charge bars have a number stamped on the end "302" followed by "78" or "100" or"118"....equal 7/8oz, 1 oz 1-1/8oz. A "502" bar is for a progressive loader not single stage. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.