jaegerbataillon511
-
Posts
129 -
Joined
-
Last visited
-
Days Won
1
Posts posted by jaegerbataillon511
-
-
Measurement on M4S90 military
-the width/Outside Diameter of the rear hanger's main section=32.5 millimeter
-Outside Diameter of the barrel at that same location (center on the rear hanger and up to barrel)=22 millimeter
-total height from the bottom of the hanger to the top of the barrel=57.5 millimeter
Measurements points directly on each millimeter line, and 0.5 measurements points directly between both milimeter lines on my caliper. The weapon is clearly a european metric firearm.
-
I have a european market Benelli M4S90 military variant and posted some pics of it in a recent thread, but deleted them. Is there any particular picture or dimension you want me to post of it?
-
Reducing felt recoil can lead to cycling problems to the inertia system on a Benelli M1S90 action.
-
I think it is legal to own a Italian steel pipe, but it`s probably not okay to mount it on a Benelli.
-
-
How do I replace the o rings?
-
It is possible you need to replace the magazine spring to the original 34.25" long 064J "M4 S90 M1014". I assume the us market M4 tactical with the shorter tube has a shorter spring and aftermarket ones could be too long.
-
I know that a M4 alloy receiver will last much past 20000 rounds, but from a cosmetic view it is prone to get scratches and small deformations during normal or combat use.
-
I would love to see that Benelli make their M4 receivers from steel. So much wear and tear problems would be solved and I doubt it would gain so much weight to the firearm.
-
Can anyone tell me what the magazine tube crimp approx 2" from the sling attachment is good for? It is best seen at @09:25 in this video.
-
My factory M4 c-stock has also a tiny wobble, and it could be that the us made c-stock retaining pin doesn`t seat down properly or is slightly too narrow in diameter due to a metric made firearm. Maybe someone could swap a factory retaining pin into the us c-stock.
-
You can see a M4 with a 20" barrel, if you scroll down and click on the 20" barrel on this new page.
I am wondering why they now make a longer barrel for this gun, and it`s just only a bit longer. Could it be that it shall accommodate a 1 shot extension past the long tube like on the picture, and where can I obtain a Benelli M4 1 shot extension for 8+1 rounds?
-
http://www.benelli.it/en/products/semiautomatic-shotguns/m4/m4-telescopic-stock
Benelli italy has updated their website with new products.
-
I would love to see the desert sunset in Arizona. Desert camping in AZ is my next goal, but without my illegal european Benelli M4 of course.
-
Counterfeit:)
-
-
Any idea how to do the conversion?
To me it looks like a genuine M4 c-stock with pistolgrip.
Obviously Benelli Italy are making a special M3 recoil tube to fit the M4 c-stock, and certainly also a recoil tube nut with threads for the pistolgrip. You can contact Benelli USA if they can ask them in Italy about this one.
It must be some kind of factory conversion, otherwise the army guys in the video wouldn`t have all their M3 Harry homeowner suited with M4 c-stocks.
-
-
I actually miss somebody, yes.
Now this village is a ghost town:)
-
It might be that this forum had to be shut down for awhile to upload the forums database for FBI evidence due to the recent mayhem in this forum.
It`s just a thought.
-
Why would someone need to make this Hollywood roll over like that at @0:35?
-
I know, it seems GG&G has no notches and will spin slippery like a wheel during operation.
-
Thats fine, looks like the CC one is machined to the original that won`t spin and its smaller.
-
I have recenlty experienced the same thing in my Benelli, and therfore I cleaned the barrel for so many hours. I had to wear it off with a 12ga brush and other cleaning solvents didn`t work.
Old M4S90s and recent models
in Benelli
Posted
Obviously I have a old M4 from 2003 without the barrel receiver seat ring and the winglet on the barrel extension.
The other M4S90 I have is from 2011 production, and this one has these new improvements. Are the receivers on both shotguns similar, so I can swap the barrels on each other, or is there a slight difference? Are the newer M4 better than the earlier models without the barrel ring?