bcruze
-
Posts
38 -
Joined
-
Last visited
-
Days Won
1
Posts posted by bcruze
-
-
I posted in the main thread, but I might as well here also. I received mine today and it's what I was hoping for...completely clears the GG&G pad.
- 1
-
Got mine today...it's perfect. Completely addresses the length issue when using an extended bolt release.
-
21 minutes ago, Milspec said:
Is there any paperwork that needs to be filed for this? Per your description in the US if it's under $100 we're good to go. However, with shipping the total appears to go over that mark. Or, does shipping not count in regards to required paper work?
It's not going to be a problem...
-
On 11/20/2021 at 12:39 PM, RxArms said:
Yes email me when they are available and I’ll hook you up. Like I said I don’t make much on these but I’ll see what I can do!
I was half kidding, I'm happy to pay full price for a quality piece from a small manufacturer. Looking forward to it!
-
1 hour ago, sniiped said:
I have one of the first run one's, and I love it, but I think I would love it even more if it were extended slightly. I don't know by how much, but extended I think could be a win as well. Is there plans or could there be plans of an extended version in the future?
He said the new version was going to be extended 1/4"...
On 11/4/2021 at 5:27 PM, RxArms said:I am going to make the handle 1/4" longer, but the diameter will be a bit smaller (as mentioned, to keep the weight at OEM spec). I will not exceed OEM weight as that is important to most, so I want to keep that spec intact. Still working with the machine shop to determine the spec for handle diameter. I will report back when I have more firm specs.
This should alleviate all the short handle issues that some may have when combined with bolt release pads that extrude a bit.
I'll be in for a third once it's available...I think this one will be perfect. @RxArms any chance of a discount?
-
I know I already have two of them, but I'd be interested in a longer cerakoted version. My only quibble was it was a bit too short to clear my GG&G bolt release...I think a slightly longer one wound be the bee's knees.
-
-
Here are some pics of the clearances for the raw titanium version. There is plenty of room and the cerakote shouldn't add any measurable difference to these. Bolt closed, it's about even with the GG&G bolt release. Bolt open, it's got plenty of room as well. @StrangerDanger is likely correct, the other guy inserted the FFT bolt past the detent...I had that bolt too and didn't experience that issue.
I'm no shill for this bolt/manuf, but until (if) CC comes re-releases theirs, this one is staying on.
- 3
-
Awesome...just picked up a second to replace the raw titanium one
- 1
-
I received mine today, it's great! I do have a couple of points:
- Having this on my gun now, I, too, would like a black/parkerized/cerekote version. The titanium is nice, but I do like to have my purse match my shoes. I'm in for another one if black becomes a reality.
- It would be great if the actual handle was just a just a tad longer. I have the GG&G bolt release on mine since it is pretty wide and right under the charging handle, I only have 5/8" of handle to grab. Not a deal breaker and definitely an outlier use case, if you don't have the GG&G it's a perfect length.
-
I can't speak to that particular product but I ordered a M600DF on 11/13. It shipped on 11/18 and I received it 11/20, so they're alive...
- 1
-
Does anyone have one they'd like to get rid of at a reasonable price?
-
-
New or used? Just curious. For what I have seen some sell for in the past, that could be a bargain.
I would consider it New because I've never had it outside of the house. It's on the gun right now but it's never been fired while it's been on there. I picked it up NIB from a small gun shop last year, I still have the packaging and rail covers. I can post pics if anyone is seriously interested.
Let's get a bidding war started!
-
I’d let mine go for $400
-
-
Looking for a couple sections of these. They came with the M80 M4 forend (and were also sold separately) but are now discontinued as well, so I was hoping some of you Surefire forend equipped guys may have a couple laying around you're not using.
-
I'd be in for one.
-
So after some years I finally picked up an M4. I haven't kept up with the aftermarket in the interim since 2012, but does anyone have any idea why so many of the nicer/'cool' aftermarket parts are no longer available?
- Geissele Hammer
- Surefire M80 Foreend
- ATI Raven furniture (not that I'd want this, just an example)
- ATI flat mag cap
- Carrier Comp charging handles (I get it, focused on the mag tubes)
It seems like the only company still making M4 parts are FFT and GG&G. With the kind of backlog that Carier Comp has for mag tubes, there clearly seems to still be a demand for modifications to this gun...it's just odd that so many things are discontinued.
Alternatively, if anyone has a Geissele hammer and Surefire forend they'd like to get rid of, let me know.
-
No real need for my Supernova Collapsible stock, was wondering what the market was bearing these days for this item. As far as I know they're still pretty hard to get...
-
And you should at least keep shells in the magazine, even if you don't have one in the chamber. That's just that much longer you have to wait and more steps you have to perform under stress should you actually need it.
-
I'm planning on replacing my stock recoil pad with a Limbsaver. Does anyone have any idea what size/type screw is behind those tiny holes in the stock recoil pad (it's a SNT collapsible, but I assume they're all the same)? Feels like a philips but I don't want to strip it out trying to unscrew it and would rather have the correct size. Thanks in advance!
-
I have a new comfortech non-pg stock, never been fired or seen the outside of the house. How about that + $50 shipped? Message me and lemme know.
-
i am waiting to get the nordic setup. is your TLR2S the one w/ the green laser as well?
also, where did you get that sling setup? i was looking for a clip like that but don't know what it's technically called.
Mine just has the red laser.
The sling is just a Blackhawk two point sling and GrovTec 1-1/4" swivels.
Sling: http://www.midwayusa.com/product/133312/blackhawk-universal-tactical-sling-ar-15-nylon-black
Benelli M4 3/4" Titanium/Steel hybrid charging handle
in Benelli
Posted
What would the length be on this? Short like the original or long like the new version? I'm not one to be concerned about weight...a couple-or-three of ounces on a relatively heavy gun is of no concern to me. If it's longer, I may be in for a fourth.