D'zaster
-
Posts
217 -
Joined
-
Last visited
-
Days Won
5
Posts posted by D'zaster
-
-
It was discounted on DVOR so I decided to give it try. I suspect it was produced before the m4 specific handle was available but I don't know for sure.
-
I have a GGG oversized handle that I found has enough side-to-side play when installed that it can rub slightly on the receiver.
-
Picking up my 1301 Tactical this weekend.
-
PM sent
-
4951A0F5-DF37-45FC-8048-73BF4F036616.heic4951A0F5-DF37-45FC-8048-73BF4F036616.heic
I went with 7 on the receiver
-
It's crazy you had this defect in the first place. I agree, why they did not replace the parts is worthy of follow up inquiry.
I've experienced lousy customer support but would definitely not expect it from Benelli.
-
1
-
-
-
I'm guessing the M1014 w "skeleton stock" and US flag are all pinned regardless of where its sold??
-
I take that back. I cleaned up the threads and on reassembly, I used a spot of Blue in case I ever need to remove it in the future.
-
I used a spot of red lock tight. Not much.
-
I had a similar experience when removing the stock mag tube from my 1014. It was a quick process.
Also, I agree, great photo!!I
-
Were you able to cycle the action at the gunshop?
-
LE model!
-
I have a Winchester SX3. Also recently picked up a Franchi Instinct O/U (have not fired it yet)
-
My reply to Les_garten was for a different thread - sorry
-
Here's picture of mine. Fit's well and doesn't touch the receiver. I wondered about the shape of the pointed end being quite different than stock but it seems fine. I'll know more after a couple hundred rounds.
-
Les, I tried one of the oversized GGG bolt handles which kisses the receiver when I insert it. I'll probably have it machined a bit for future use. Right now the RX Arms bolt handle is my go-to.
-
Thanks for fast shipping, RX Arms.
I just received my raw Ti handle. Fits perfectly!
-
1
-
-
I followed SD's instructions and the 10403 limbsaver was easily installed on my c-stock.
-
1
-
-
I think that curved c-stock requires the 5 position recoil tube, yes?
-
and IWC mount.....
-
Damn, I thought $200 was too much for the recoil tube........
-
I finally got around to installing the Esstac card this AM. Made a cut for the pin.
-
1
-
-
yes, about the the snap ring pliers and no need to turn/rotate. It should come straight out easily.
Who said Beretta 1301 is smoother than M4?
in Benelli
Posted
I recently purchased a 1301 Tactical LE. Mine has the Mesa pistol grip and limbsaver pad. I like the light weight. It certainly seems to have a lot of positive reviews but I'm not anticipating it will be better than the M4. I have not yet shot it but I can appreciate the M4 will have less felt recoil due to weight difference. My plan is to do a similar comparison and report back.