Kahamu
-
Posts
122 -
Joined
-
Last visited
-
Days Won
7
Posts posted by Kahamu
-
-
100 rounds of hot loads. Have fun!
-
The bundles with a T-2 or CompM5 are back in stock, boys.
-
1
-
-
Can't wait for user reviews!
-
@Milspechow do you like the sync + T-2 combo. Do you use the stock in the middle position or fully extended?
-
That checks. It's back in stock again, boys!
-
I ordered a spring not too long ago from them. Kip called me and explained Marcy was on vacation. Took a little over a week for them to ship the spring to me.
-
Congrats! Hope you get that Bolt issue sorted out.
-
What do you mean by crooked recoil tubes? As in not aligned properly so that the c stock is off center?
-
I would also not accept that. Keep fighting it.
-
1
-
-
For those waiting, the sync mount with T-2 bundle is back. https://scalarworks.com/shop/integral-mounts/sync-02/
Was waiting forever for this but decided to go with a T-2 on an ADM mount. I’m 5’10 so it feels great with the c stock in the middle position haha. Good luck!!
-
1
-
-
I was tempted when it was initially posted.. but realized I had no real use for it. Congrats on a great deal!
-
1
-
-
8 hours ago, Unobtanium said:
I am using Aimpoint. I also am using Surefire scout lights due to their impact buffers. Shotguns are absolutely brutal. Ive torture tested most things with full power buck, and have had to alter how I would normally do things on an AR, for these gauges. I use IWC light mounts. Torque to 30 in lb, and use Loctite 243. I torque the mount to scout body to 20 in lb, using loctite 243. The scalarworks to T2 interface gets NO locker except what nylok is on the SW screws, on account of the T2 using helicoil inserts. The SW to receiver juncture, I torque to 15 in lb, and avain use loctite 243. I de-grease all male and female threads with acetone, and apply loctite to the female threads instead of the male. This is because the first 2 to 4 threads on the tip of the bolt are what do the lion's share of the work. When you loctite the male threads, these are typically wiped near clean of threadlocker dhring the threading process by the time the bolt is seated and tight. I wipe off the excess and allow full 24 hour cure time. This keeps my stuff from rattling off when I run it hard with full power stuff for hundreds of rounds per day.
Ive seen enough stuff fall off guns in 5.56 carbine courses. I KNOW there are plenty of gauges out there with stuff just hanging on by a prayer, lol!
Another thing to note, you actually void the warranty on the T-2 if you use thread locker with it.
-
1
-
-
Feels good..
-
2
-
2
-
-
Your answer may possibly be here
-
Yeah they are! Been waiting forever for their T-2s to come in but kenziesoptics.com had a comparable deal going this weekend. Finally got a T-2.. feels great in the middle stock position. May just forget about getting a scalarworks sync and keep it as is.
-
1
-
-
42 minutes ago, Milspec said:
Waiting for the T-2/Sync combo to come back
Same here. Been waiting since August
-
1
-
-
Nice snag on the scalarworks t-2 mount. Looks like fft is the only way to go to grab em at the moment.
-
Nevermind, forgot I actually got the LE price through aimpoint direct. Actually cheaper to go through rooftopdefense.com or kenziesoptics.com.
-
1
-
1
-
-
This was posted by iwc on the gram. Like stated, the recessed part does not fully go into the slot.
-
1
-
3
-
-
3 hours ago, Doge said:
I had an LE discount available so picked one up with the mount.
I dig it. But for T3 Micro I would like to see turret adjustment without caps. Perhaps flush like the Aimpoint ACRO or Trijicon SRO. Don't change mounts.
How much is a LE discount for the t2? I already pulled the trigger on one after trying a RMR.. not a fan.
-
5 hours ago, Milspec said:
Good to know about the screws. I'm more curious how the recessed part of the QD fits. Does it insert fully/flush into the slot?
I was under the impression that this was the piece that's giving everyone fitment issues.
I'm just looking at pictures and thinking about how it fits. So my apologies if I'm talking out of my behind.
I assumed it was the screws. The recessed part does not fully insert into my stock. It's fully secure though and sits flush with the cheek rest. I could possibly fully insert if it was more in the middle? Not sure.. I got it in place and it works so don't want to mess with it haha. I just copied SD's set up and put the QD mount high on the stock.
-
1
-
-
1 hour ago, Milspec said:
I'm wondering what SD's experience has been with these. Is there some fitment wizzardry to this part?
For those that have been successful, are you installing the parts and letting the torque from the bolts pull the QD into the slot?
Or, do the parts fit and clear the slot as one would hope? It seems like the BFG Uloop would be a great alternative.
Mine was a perfect fit. No forcing needed. 11715 model.
-
1
-
1
-
-
I've had the savior urban for a month now. Also recommend it.
-
59 minutes ago, Doge said:
Damn, thought maybe your P-2 came in
Hot Deal on a Nice Weapon Light -- Cloud Defensive Rein
in Benelli
Posted
+1 for the Rein. I've got a micro on my mk18 and love it. May have to look into replacing my m600df on the m4 with another one.