Search the Community
Showing results for tags 'light firing pin strike'.
Found 1 result
I have a Benelli SBE II 12/28 LH I purchased new. Its 3 years old. I shoot only Skeet & Trap with it. I've shot several cases of shells with it. Lately (last 9 months or so), its been misfiring about 1 in 50 shells. When this happens, I eject the shell, examine it, reload it and on the 2nd trigger pull it fires - everytime. When examining the shell that misfires, the firing pin mark on the primer is very light. When this shell fires on the second try, the firing pin mark is deep like all the other shells that fired correctly. I only use fresh Federal or Winchester 2-3/4", #8, 1-1/8 oz, 3 Dram shells - I don't reload. And NO, I DO NOT "ease" the bolt to close the chamber. I let the bolt slam. The issue occurs whether the gun has been cleaned or dirty, internal parts lubricated well or not. Like I said, problem occurs approx 1/50 shots. In January, I sent the gun in to Benelli. Their gunsmith found nothing wrong and returned it. I did not use it for months since I was using my new Beretta SP O/U. A month ago, I used my SBE II at a wing shooting clinic and shot a case of shells (Winchester & Federal) with no misfire problems whatsoever. Then 2 weeks ago on the Skeet field, the misfires started again. Took the gun down - it wasn't very dirty. Cleaned and oiled everything again. This is VERY frustrating! The Benelli Rep recommends to send the gun in again, or buy a bunch of parts to try and find what's wrong. I said, why? Will he find the problem this time? What could have changed after 12 boxes of shells? And further, I thought this gun had a 10 year warranty? Why do I need to buy a bunch of stuff to blindly "try" to find a fix? The only thing I've seen while taking the gun down for cleaning that may be attributable to the issue, is a hardly perceptible "groove" you can't really see, but can feel with your finger nail on the firing pin at or about where it goes through the Locking head pin. But the gunsmith should have seen this when he examined the gun. This hasn't happened after 12 boxes of shells. Wondering if anyone out there had a similar misfire problem with their SBE and what you did to resolve it.