mark29860 Posted December 30, 2008 Share Posted December 30, 2008 I have a new M2 trying to change the shims. When I got the stock off it had one shim marked DX. The lady from Benelli told me to take it off put the shim marked C on and then the shim marked DX, my question is those shims have ears on them and when you put them together the ears touch and you have a gap is that correct. Any info will be appreciated. Thanks Quote Link to comment Share on other sites More sharing options...
tactical1 Posted December 30, 2008 Share Posted December 30, 2008 If I'm reading my manual correctly (I expect the setup is similar), the DX spacer goes between the stock and the receiver; the C plate goes at the end of the stock to align the stock with the respective DX spacer installed between the stock & receiver. Don't know if this is accurate for your M2 - don't think any gap is good as the plastic shims will probably crack under recoil. Quote Link to comment Share on other sites More sharing options...
mark29860 Posted December 30, 2008 Author Share Posted December 30, 2008 thanks for the help I figured it out but i do have another question. When I shoulder and point the gun I see the whole rib instead of just the bead guess I will just have to experment might need to change to the Z shim Quote Link to comment Share on other sites More sharing options...
tactical1 Posted December 30, 2008 Share Posted December 30, 2008 Might want to do a quick search on the errornet for some additional advise; fit is going to be very important for accuracy for you - if you send me your email, I'll send you some pdf files from some of my shotgun books. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.