Horten Posted July 18, 2009 Share Posted July 18, 2009 Changing from the pistol grip to the comfortech. What do I nees, as the hardware on the pistol grip is not the same. Quote Link to comment Share on other sites More sharing options...
agm65ccip Posted July 18, 2009 Share Posted July 18, 2009 Did you get the shims with the new stock, or have them from the old stock? Look in your manual toward the end ~p86 and it shows a picture of how the shims etc are setup in the comfortech stock. So if you can get the pistol grip off, and have the shims to go with the comfortech it should be as easy as: reciever->plastic shim->stock->metal locking plate->lock washer->nut Quote Link to comment Share on other sites More sharing options...
Horten Posted July 18, 2009 Author Share Posted July 18, 2009 No shims, so I guess I will have to order them. Quote Link to comment Share on other sites More sharing options...
agm65ccip Posted July 18, 2009 Share Posted July 18, 2009 well thats not good...I'm actually surprised that the shim kit didn't come with the stock I think at the very least you need that metal lock plate, you should be able to use the nut and lock washer from your PG. Quote Link to comment Share on other sites More sharing options...
Guest GunCrazyD Posted July 20, 2009 Share Posted July 20, 2009 shim kits don't come with the stocks..need those and transfer over your butt pad...the CT stock won't come with one... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.