millie Posted February 4, 2011 Share Posted February 4, 2011 How do you remove the magazine spring for cleaning? Thanks Quote Link to comment Share on other sites More sharing options...
greenhornet Posted February 5, 2011 Share Posted February 5, 2011 trying to find out myself Quote Link to comment Share on other sites More sharing options...
benelliwerkes Posted February 5, 2011 Share Posted February 5, 2011 For the Montefeltro you have to remove the magazine tube to remove the magazine spring. Like the M4 magazine tube removal. Secure the disassembled receiver in a padded vise. Make an index mark on the receiver / magazine tube with silver sharpie or similar marking device.....this will allow you to restore the magazine / receiver engagement exactly as it was assembled. This must be done because the barrel headspaces off the magazine tube and if it comes unscrewed the barrel will move forward out of battery. Use a heat gun for several minutes directed at the engagement of the magazine tube with the receiver - this will melt / release the factory Locktite. Rotate the magazine tube counterclockwise (right hand threads) with heat protective gloves. The magazine tube, magazine follower, and a magazine spring guide (for the muzzle end of the tube) will then be liberated. For re-assembly apply blue locktite to the last 1/2 of the magazine tube threads; this will make secondary magazine tube removal much easier, probably by hand alone. Quote Link to comment Share on other sites More sharing options...
millie Posted February 6, 2011 Author Share Posted February 6, 2011 (edited) Thanks for the reply. Man, this is quite a procedure. Wonder why they made it so difficult. Guess I can wash the magazine tube out with brake cleaner and then lube with something like Rem oil. Edited February 6, 2011 by millie Quote Link to comment Share on other sites More sharing options...
greenhornet Posted February 8, 2011 Share Posted February 8, 2011 For the Montefeltro you have to remove the magazine tube to remove the magazine spring. Like the M4 magazine tube removal. Secure the disassembled receiver in a padded vise. Make an index mark on the receiver / magazine tube with silver sharpie or similar marking device.....this will allow you to restore the magazine / receiver engagement exactly as it was assembled. This must be done because the barrel headspaces off the magazine tube and if it comes unscrewed the barrel will move forward out of battery. Use a heat gun for several minutes directed at the engagement of the magazine tube with the receiver - this will melt / release the factory Locktite. Rotate the magazine tube counterclockwise (right hand threads) with heat protective gloves. The magazine tube, magazine follower, and a magazine spring guide (for the muzzle end of the tube) will then be liberated. For re-assembly apply blue locktite to the last 1/2 of the magazine tube threads; this will make secondary magazine tube removal much easier, probably by hand alone. Can you post picks ? Thanks Quote Link to comment Share on other sites More sharing options...
benelliwerkes Posted February 9, 2011 Share Posted February 9, 2011 Can't upload photos....not enough posts. Send me PM. Quote Link to comment Share on other sites More sharing options...
benelliwerkes Posted February 9, 2011 Share Posted February 9, 2011 Just need to up my post count #4 Quote Link to comment Share on other sites More sharing options...
benelliwerkes Posted February 9, 2011 Share Posted February 9, 2011 Just need to up my post count #5 Quote Link to comment Share on other sites More sharing options...
benelliwerkes Posted February 9, 2011 Share Posted February 9, 2011 Just need to up my post count #6 Quote Link to comment Share on other sites More sharing options...
benelliwerkes Posted February 9, 2011 Share Posted February 9, 2011 Just need to up my post count #7 Quote Link to comment Share on other sites More sharing options...
benelliwerkes Posted February 9, 2011 Share Posted February 9, 2011 Just need to up my post count #8 Quote Link to comment Share on other sites More sharing options...
benelliwerkes Posted February 9, 2011 Share Posted February 9, 2011 Just need to up my post count #9 Quote Link to comment Share on other sites More sharing options...
benelliwerkes Posted February 9, 2011 Share Posted February 9, 2011 Just need to up my post count #10 Quote Link to comment Share on other sites More sharing options...
benelliwerkes Posted February 9, 2011 Share Posted February 9, 2011 Sorry for the repetition.....I'm in. Quote Link to comment Share on other sites More sharing options...
benelliwerkes Posted February 12, 2011 Share Posted February 12, 2011 (edited) A convoluted way to post pictures - but here's the how to on the magazine removal. Edited February 12, 2011 by benelliwerkes adding Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.