Left handed safety for Supernova

[NM_Firefighter_EMT]

Hello all,

 

I am a left handed shooter with a right handed Supernova. Ive always shot a right handed shotgun so no complaints there, however I recently heard about being able to reverse the safety on a right handed gun to accomodate a lefty. It would be nice on those colder mornings when the finger tips get a little numb. Can anyone confirm/deny it and also does anyone know if Benelli has the directions posted online anywhere? Thank in advance.

[Jackalope]

http://www.benelliusa.com/forum/showthread.php/21737-Reversing-the-Safety-SBEII?highlight=reversing+safety

[Jackalope]

Very easy, took me about 5 mins to do it. Hardest part is finding a pin punch to compress the spring down while you knock out/reinstall the detent.

Edited September 11, 2012 by Jackalope

[NM_Firefighter_EMT]

Thanks for the info Jackalope, I figured there might already be a thread out there. Happy shooting.

[Jackalope]

No problem man.

[the_d]

Hi there,

 

When researching how to reverse the safety on the Supernova, I found this thread. However, when I attempt to open the link with the instructions, I receive the 404 error message.

 

I realize this is an older thread but is there any chance you can try to re-post the link? Or do you happen to have step-by-step instructions that you might be willing to share? I can probably send it off to Benelli to have it done but I really enjoy learning how to perform modifications myself. In addition, if I do send it to Benelli, I'm concerned it won't be returned before dove season begins.

 

Any assistance you can provide us greatly and humbly appreciated.

 

Thanks!

 

http://www.benelliusa.com/forum/showthread.php/21737-Reversing-the-Safety-SBEII?highlight=reversing+safety

[RoadDad]

Hi there,

 

When researching how to reverse the safety on the Supernova, I found this thread. However, when I attempt to open the link with the instructions, I receive the 404 error message.

 

I realize this is an older thread but is there any chance you can try to re-post the link? Or do you happen to have step-by-step instructions that you might be willing to share? I can probably send it off to Benelli to have it done but I really enjoy learning how to perform modifications myself. In addition, if I do send it to Benelli, I'm concerned it won't be returned before dove season begins.

 

Any assistance you can provide us greatly and humbly appreciated.

 

Thanks!

Here's the thread you asked about above. No idea if it is what you are looking for however.

 

http://forums.benelliusa.com/showthread.php/21737-Reversing-the-Safety-SBEII?

[the_d]

Thanks RoadDad for providing the link. The original link was truncated so I didn't see that it was for the SBE. Apparently the design is different for the SN. I appreciate you trying and taking the time to respond. Finding instructions for the SN has proven a challenge. Thanks again!

 

Here's the thread you asked about above. No idea if it is what you are looking for however.

 

http://forums.benelliusa.com/showthread.php/21737-Reversing-the-Safety-SBEII?