Super black Eagle Bolt Disassemble?

[c.j.]

I have taken the entire gun apart but cannot figure out how to get the bolt appart to take the spring out and clean it? any ideas or videos?

[truckcop]

There's a pin at the back of the bolt that holds the firing pin in. Pull that pin out. Remove the firing pin. Protruding from the top in the front part of the bolt is the locking head pin. Turn the bolt upside down and that pin will come out. Now the locking head will come out along with the spring.

[c.j.]

There's a pin at the back of the bolt that holds the firing pin in. Pull that pin out. Remove the firing pin. Protruding from the top in the front part of the bolt is the locking head pin. Turn the bolt upside down and that pin will come out. Now the locking head will come out along with the spring.

 

I did everything up to this part: Now the locking head will come out along with the spring

 

the locking head wont come out?

[truckcop]

If you did everything up to that part, there's nothing else holding the locking head in. The firing pin retaining pin on the left holds the firing pin in, which holds the locking head retaining pin in (short round thing with the hole in the bottom on the right, under the locking head), which holds the locking head and inerta spring in.

 

Edited March 8, 2013 by truckcop

[c.j.]

I guess I will just have to pull really hard on it, I bought the gun 10 years ago and havent cleaned it since. Yes I know Im terrible

[lugie]

Needle nose pliers to get it out if it's really gummed up. No big deal.

[11029]

I guess I will just have to pull really hard on it, I bought the gun 10 years ago and havent cleaned it since. Yes I know Im terrible

.

Was the gun still shooting OK?