bamacrowkiller Posted January 18, 2014 Posted January 18, 2014 Signed up to see if I could find help for a problem. I found it. My problem was that shells would not cycle consistantly. When unloading gun shell in chamber would come two thirds of the way out bolt would stop. Lift extractor hook bolt would go back shell would fall loose in gun, bolt would go back. Trouble was the rivet closest to chamber on ejector was loose catching the rim of shell. tightened rivet problem gone. good luck! Quote
Capt_C Posted January 18, 2014 Posted January 18, 2014 What did you have to do to "tighten the rivet"? --CC Quote
bamacrowkiller Posted January 19, 2014 Author Posted January 19, 2014 Remove barrel from gun, place a center punch in a vice. Probaly need help for this , place dimple side of rivet over center punch, use a pin punch on other side hit with hammer Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.