Changing the comfortech comb on a Supersport

[ejm20]

Whats the procedure on changing the ComforTech comb on a SuperSport? One thread suggests removing the stock or using a screwdriver but am hoping there is an easier way.

 

Thanks!!!

[truckcop]

Like the butt pad, the comb is held in place by protrusions in the comb that go into corresponding recesses in the stock. At the front end of the comb, work your fingernails in between the comb and stock. Carefully pull up on the comb and the protrusion at the front of the comb will come out of its recess. Then just lift it off the stock.

[ejm20]

I was able to get the comb that came with the supersport off....Thanks!!! Getting the extra high comb back on is very difficult, still not sure its completely snapped in place. Looks like you need to get the back hook in then bend it so the front hooks in but the middle is very stubborn. Any tricks on how to get these installed easily?

[truckcop]

I'd compare the dimensions of each one in the area where they attach to the stock. The new one may need some trimming somewhere. You could also try softening the new one up in some hot water and installing it. Wrap some tape or something similar to hold it down and remove it after it cools back down. Otherwise, I got nuthin'.