WTB - Tale Off M4 Field Stock

[David Deyarmin]

I'm look for a complete M4 Field Stock Assembly

I do not need the tube, jut the stock, sling plate and mounting bolt/washers

If you have one send an email to [email protected]

[Ben elLes]

I bought one here.  They sold me the sling plate but it wasn’t necessary as it was already in the stock.  I got a refund for that piece.

 

https://www.midwestgunworks.com/page/mgwi/prod/81041

[David Deyarmin]

3 hours ago, Ben elLes said:

I bought one here.  They sold me the sling plate but it wasn’t necessary as it was already in the stock.  I got a refund for that piece.

 

https://www.midwestgunworks.com/page/mgwi/prod/81041

Did the mounting bolt come with that?

[Ben elLes]

7 hours ago, David Deyarmin said:

Did the mounting bolt come with that?

Nothing else was needed.  It’s on the gun so if that’s a part internal to the stock then yes. They suggest buying the sling plate and the customer service did inform me that it is not always included.  My experience showed that it was the full set up.  They don’t recommend any other pieces.

 

 

[rubicon20032003]

There’s one on eBay now,

[David Deyarmin]

1 hour ago, rubicon20032003 said:

There’s one on eBay now,

There are a couple, but the least expensive listing is more then what I can get it for from EO

[David Deyarmin]

1 hour ago, Ben elLes said:

Nothing else was needed.  It’s on the gun so if that’s a part internal to the stock then yes. They suggest buying the sling plate and the customer service did inform me that it is not always included.  My experience showed that it was the full set up.  They don’t recommend any other pieces.

 

I'm confused, you don't know if it came with the mounting bolt?

Some stocks screw onto the threads of the buffer tube and others use a mouthing bolt that screws into the end of the buffer tube.

 

[Ben elLes]

11 minutes ago, David Deyarmin said:

 

I'm confused, you don't know if it came with the mounting bolt?

Some stocks screw onto the threads of the buffer tube and others use a mouthing bolt that screws into the end of the buffer tube.

 

Yeah, I just woke up when I wrote that, and now I’m at work so I can’t look at the schematic for the stock.  It screws onto the buffer tube like the standard benelli fixed pistol grip stock.

[David Deyarmin]

8 minutes ago, Ben elLes said:

Yeah, I just woke up when I wrote that, and now I’m at work so I can’t look at the schematic for the stock.  It screws onto the buffer tube like the standard benelli fixed pistol grip stock.

I know this is the pistol grip stock but the I figured you would need parts 85 -88 to hold the sling plate in place for the field stock too

 

[Ben elLes]

36 minutes ago, David Deyarmin said:

I know this is the pistol grip stock but the I figured you would need parts 85 -88 to hold the sling plate in place for the field stock too

 

Yes, so in my case.  The MGW stock I bought was fully assembled with no parts missing.

[David Deyarmin]

49 minutes ago, Ben elLes said:

Yes, so in my case.  The MGW stock I bought was fully assembled with no parts missing.

Thanks

[rubicon20032003]

6 hours ago, David Deyarmin said:

Thanks

There’s a new one on eBay for $97 shipped 

[David Deyarmin]

3 hours ago, rubicon20032003 said:

There’s a new one on eBay for $97 shipped 

SOLD

[brightt]

I got one I can probably part with