bob3 Posted November 13, 2022 Share Posted November 13, 2022 I recently was able to purchase the desirable C stock for my Benelli m4. My m4 currently has the normal pistol grip stock it came with from the factory. I knew that the recoil tube under the stock would be the "proper" one with 3 notches in it. I assumed all was well, however, being very excited I decided I was going to remove the pistol grip stock & check the recoil tube even though my C stock has not arrived yet - as a practice run. I was able to remove it, and that is when I noticed it seems the cuts in the recoil tube are not lined up with the receiver. they are canted at about a 40-45 degree angle to the side. My question: When they install the tube at the factory, do they make sure to properly time the recoil tube, even if it does not get a C stock? I tried researching the issue and I found no complaints or instances on YouTube or forums of people getting a collapsing stock only to find that their recoil tube was not lined up. If anyone has any knowledge or answers, it would be appreciated. I want to know if this is normal or if I'm screwed. Quote Link to comment Share on other sites More sharing options...
RxArms Posted November 13, 2022 Share Posted November 13, 2022 Pic would be good to confirm, but this is normal. Quote Link to comment Share on other sites More sharing options...
bob3 Posted November 14, 2022 Author Share Posted November 14, 2022 RXArms I appreciate the response - it was indeed normal. I received my beautiful C-stock today and it was everything I hoped for and more. It installed easily and lined up almost perfectly with the rear sight/ receiver. Good to know my worries were unjustified. My m4 has reached its full potential. 1 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.