jbanke27 Posted December 26, 2023 Share Posted December 26, 2023 I was out duck hunting this last weekend and started to have an issue. Had already shot atleast 10 shots that morning but all of a sudden I shoot 1 shot and the carrier got stuck in the up position not allowing the next shot to cycle. I proceeded to manually unload the shells from the magazine and was able to pull the carrier down with a screwdriver. I hit the cartridge drop lever, heard the “click”, and tried to pull the bolt back but was completely stopped halfway. I hadn’t disassembled the gun for a few weeks prior to this so I know it wasn’t an assembly issue and it was purchased brand new last year. I disassembled the gun later that day but the only noticeable thing was that the bolt stop tooth was loose. I couldnt figure out if that was common so I cleaned and lubed everything to see if that would help but it didnt. If anyone has experienced something similar or can recommend a course of action, any feedback would be much appreciated. Quote Link to comment Share on other sites More sharing options...
remarkable Posted December 27, 2023 Share Posted December 27, 2023 A good photo would be helpful as well as the proper part names. This can be located on a Schematic at Midwest Gun Works. Quote Link to comment Share on other sites More sharing options...
TreyMac Posted January 27 Share Posted January 27 @jbanke27 did you find anything out? I am having the same problem. Started out of no where and has been my only issue with the gun. Quote Link to comment Share on other sites More sharing options...
figgeth Posted January 28 Share Posted January 28 I have a carrier latch ordered when I get it installed I'll let you know if that works Quote Link to comment Share on other sites More sharing options...
TreyMac Posted February 12 Share Posted February 12 Sent my gun back to beneli on Friday 2/9. Will let you guys know what they say. Quote Link to comment Share on other sites More sharing options...
TreyMac Posted Tuesday at 11:32 AM Share Posted Tuesday at 11:32 AM Beneli ended up replacing my recoil tube assembly and mag tube. I believe mag tube may have not been necessary but I’m not complaining. Trying it out this afternoon but they tested it for operation. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.